Vous BEA 0B0-108 pouvez télécharger le démo BEA 0B0-108 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.
Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test BEA 0B0-108. Ajoutez la Q&A au panier.
Pass4Test est un seul site de provider le guide d'étude BEA 0B0-108 de qualité. Peut-être que vous voyiez aussi les Q&A BEA 0B0-108 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
Si vous faites toujours la lutte contre le test BEA 0B0-108, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de BEA 0B0-108. Si vous avez déjà décidé à s'améliorer via BEA 0B0-108, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
Pass4Test a de formations plus nouvelles pour le test BEA 0B0-108. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test BEA 0B0-108 à tous les candidats qui nous choisissent. L'importance de Certification BEA 0B0-108 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.
Code d'Examen: 0B0-108
Nom d'Examen: BEA (System Administration Exam)
Questions et réponses: 70 Q&As
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test BEA 0B0-108.
0B0-108 Démo gratuit à télécharger: http://www.pass4test.fr/0B0-108.html
NO.1 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
Before deploying it into the test environment, you review the configuration of the Sales department's
Enterprise Application, which is meant to contain a JDBC Application Module ?you are concerned that it
may not have been built correctly. Most of an application's deployment descriptors only reference the
JDBC module using a JNDI name. Which file listed below is the only one that refers directly to the JDBC
Application Module file?
A. config.xml
B. application.xml
C. weblogic-ejb-jar.xml
D. weblogic-application.xml
Answer: D
BEA certification 0B0-108 0B0-108
NO.2 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
When starting WebLogic Server, the Marketing database is unavailable. Which of these Data Source
configuration options will ensure that the Marketing application can access its database once it becomes
available again?
A. Test Connections On Reserve
B. Test Frequency
C. Connection Creation Retry Frequency
D. Login Delay
E. Profile Connection Reservation Wait
Answer: C
certification BEA 0B0-108 0B0-108 0B0-108 0B0-108 examen
NO.3 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
The database team informs you that they have now implemented Oracle Real Application Clusters (RA for
the Customer Service database, and applications should connect to a second database node if the
primary node is unavailable. You set up a Multi Data Source in Failover mode, which is configured to
use two Data Sources PrimaryDS and SecondaryDS, each connecting to one Oracle RAC node.
WebLogic Server will fail over to SecondaryDS if a connection test to PrimaryDS fails. Under what other
condition will this happen by default (that is, with no additional options checke)?
A. If a connection to PrimaryDS is not released within Statement Timeout seconds.
B. If all the connections to PrimaryDS are in use.
C. If the administrator has suspended the PrimaryDS Data Source.
D. Failover will only occur if a connection test fails for a PrimaryDS connection.
Answer: C
BEA 0B0-108 examen 0B0-108 examen 0B0-108 certification 0B0-108
NO.4 When configuring JMS Modules using the WebLogic Administration Console or WLST, the module
information will be stored in:
A. <modulename> stanza in the weblogic-application.xml file.
B. <modulename> stanza in the config\config.xml file.
C. <domain>/config/jms/<modulename>-jms.xml file
D. <domain>/servers/<servername>/targets/jms/<modulename>_<servername>.xml
Answer: C
BEA 0B0-108 0B0-108 examen 0B0-108 0B0-108
NO.5 What are the four basic components of a JMS system-resource module in the config.xml in WebLogic
9.x?
A. Name, target, subdeployment, descriptor-file-name
B. Domain, jms-server, connection factory, destination
C. Config.xml, jms-module, subdeployment, descriptor-file-name
D. Name, jms-module, subdeployment, descriptor-file-name
Answer: A
BEA certification 0B0-108 0B0-108 examen 0B0-108 0B0-108
NO.6 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
In the future, each department will have its own schema within the Oracle database and the developers
are writing their code with this in mind. However, for now, it has been decided to store all data in a single,
company-wide schema. Which of the following approaches will make a future move to multiple schema
simple, while making the most efficient use of resources today?
A. Deploy an application-scoped Data Source module with each application.
B. Deploy a Data Source system module and assign it multiple JNDI names.
C. Deploy each department's application to its own WebLogic server.
D. Deploy a Data Source system module for each department's application.
Answer: B
certification BEA 0B0-108 certification 0B0-108 certification 0B0-108 certification 0B0-108 0B0-108
NO.7 WebLogic store-and-forward service is used for:
A. Storing and forwarding the configuration reliably to all the Managed Servers in a cluster
B. Storing log messages and forwarding them to the administration server for creating the Domain Log
C. Storing and delivering JMS messages reliably between applications across WebLogic Server 9.x
instances
D. Storing and forwarding EJB requests reliably to a back-end EJB cluster
Answer: C
BEA certification 0B0-108 0B0-108 0B0-108 0B0-108
NO.8 The default location for storing JMS persistent messages in WebLogic Server 9.x is:
A. Database Store using JDBC
B. WebLogic Persistent Store using a file
C. LDAP server using the embedded LDAP server
D. Remote server using t3 socket buffering
Answer: B
BEA certification 0B0-108 certification 0B0-108
NO.9 Scenario : The Stock Control Application you are going to deploy to a cluster of WebLogic Managed
Servers requires a JMS destination to asynchronously deliver the messages to the back-end
Warehousing Application. To distribute the messages across the cluster, you decided to configure the
distributed destination. Also the Warehousing Application is a legacy application written to implement a
proprietary MQ API connecting an MQ-Series server. The Stock Control Application is implemented as a
web application on a WebLogic cluster delivering the message to the distributed destination. The cluster
has three Managed Servers hosted on two high powered machines and one low range/powered machine.
To distribute the physical destinations unevenly across the clustered WebLogic Managed Servers so that
the high-powered machines can receive more messages than the low-powered machines, configure the
distributed destination with:
A. "Allocate Members Uniformly" set to false and manually select more physical destinations from the
high-powered machines
B. "Uneven Distribution" set to true and select all the physical destinations
C. "Uniform Distribute Destination" set to true and select all the physical destinations from the
high-powered and low- powered machines
D. "Load Balancing Policy" set to Random and select only the destination from the high-powered machine
Answer: A
certification BEA 0B0-108 0B0-108 0B0-108
NO.10 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
Before deploying it into the test environment, you review the configuration of the Sales department's
Enterprise Application, which is meant to contain a JDBC Application Module you are concerned that it
may not have been built correctly. Which of the following is not a requirement for JDBC modules?
A. It is contained in a file that ends in -jdbc.xml.
B. It includes an element that lists its targets.
C. It conforms to the weblogic-jdbc.xsd schema.
D. It includes a unique name element.
Answer: B
certification BEA 0B0-108 examen certification 0B0-108 0B0-108
Les produits de Pass4Test sont préparés pour le test Certification BEA 0B0-108, y compris les formations et les informations ciblées au test BEA 0B0-108. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
没有评论:
发表评论