Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A IBM A4040-121 comme votre guide d'étude.
Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.
Les produits de Pass4Test sont préparés pour le test Certification IBM C4070-603, y compris les formations et les informations ciblées au test IBM C4070-603. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Choisissez le Pass4Test, choisissez le succès de test IBM C2040-403. Bonne chance à vous.
Code d'Examen: A4040-121
Nom d'Examen: IBM (Assessment: Virtualization Technical Support for IBM i -v1)
Questions et réponses: 102 Q&As
Code d'Examen: C2040-403
Nom d'Examen: IBM (IBM Forms 8.0 - Form Design and Development)
Questions et réponses: 105 Q&As
Code d'Examen: C4070-603
Nom d'Examen: IBM (IBM System z Solution Sales V6)
Questions et réponses: 86 Q&As
Si vous faites toujours la lutte contre le test IBM C4070-603, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de IBM C4070-603. Si vous avez déjà décidé à s'améliorer via IBM C4070-603, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
Selon les anciens test IBM C2040-403, la Q&A offerte par Pass4Test est bien liée avec le test réel.
Il y a plusieurs de façons pour réussir le test IBM C2040-403, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.
A4040-121 Démo gratuit à télécharger: http://www.pass4test.fr/A4040-121.html
NO.1 A customer needs two client IBM i partitions on a 4-core Power 720, with storage hosted by
VIO Server. What is the least expensive method to manage this environment?
A. HMC
B. Virtual Partition Manager
C. Integrated Virtualization Manager
D. Systems Director Navigator for PowerVM
Answer: C
certification IBM A4040-121 examen A4040-121 examen certification A4040-121 A4040-121 examen
NO.2 A customer wants two VIO Servers in the CEO of a proposed Power 720. To provide redundancy
for the IBM V7000 SAN they will utilize to provision disk for his client partitions.
What is the minimum required to make this possible?
A. A 6-disk storage backplane
B. An 8-disk storage backplane
C. A 6-disk storage backplane and the split drive bay feature
D. An 8-disk storage backplane and the split drive bay feature
Answer: C
IBM examen A4040-121 examen certification A4040-121 A4040-121 examen
NO.3 A client IBM i 7.1 partition is being hosted by dual VIO Server partitions (VIOS-1 & VIOS-2). A
Shared Ethernet Adapter (SEA) has been created in order to provide Ethernet failover capability
for the IBM i partition. The IBM i partition will use the Ethernet resources of the VIO Server
partitions.
How many virtual Ethernet adapters need to be defined on the HMCI in the IBM i client, and VIO
Server partition profiles to support SEA and failover?
A. IBM i Client: 1 adapter:
VIOS-1: 1 adapter
VIOS-2: 1 adapter
B. IBM i Client: 2 adapters
VIOS-1: 1 adapter
VIOS-2: 1 adapter
C. IBM i Client: 1 adapter
VIOS-1: 2 adapters
VIOS-2: 2 adapters
D. IBM i Client: 2 adapters
VIOS-1: 2 adapters
VIOS-2: 2 adapters
Answer: C
certification IBM A4040-121 examen certification A4040-121
NO.4 In addition to Qshell and PASE, what other product needs to be installed on an IBM i partition
in order to remotely run scripts on an HMC?
A. IBM Portable Utilities for i
B. IBM i Integrated Server Support
C. IBM Cryptographic Service Provider
D. IBM Network Authentication Enablement for i
Answer: A
certification IBM certification A4040-121 certification A4040-121
NO.5 A customer has purchased a new BladeCenter H (BCH) and POWER blade to run IBM i. The
POWER blade is configured with two Fibre Channel interlaces for attaching SAN and tape.
They have an IBM TS3500 tape library with a fibre channel connection, and current firmware is
running through a fibre switch to another IBM i system. One port on the existing switch and one
port in the BCH fibre switch has been zoned to provide a connection from the tape library to the
BCH.
After IBM i 7.1 SLIC and base OS are installed on the blade from IBM distribution media, the tape
library does not appear in the device configuration.
What is the most likely cause of the problem?
A. The existing switch does not support NPIV.
B. NPIV enablement was omitted when configuring the BCH switch.
C. The BCH switch configuration must match the link speed of the TS3500.
D. A switch-to-switch cable is required. A switch to device cable was shipped with the BCH by default.
Answer: A
IBM certification A4040-121 A4040-121 examen
NO.6 Disk from a fibre-attached V7000 disk subsystem will be used for an IBM i partition. What type
of adapter is required in the IBM i partition?
A. SAS disk adapter
B. Virtual SAS adapter
C. Virtual SCSI adapter
D. Fibre Channel adapter
Answer: C
certification IBM certification A4040-121 A4040-121
NO.7 An administrator wants to share a fibre attached TS3100 tape library between multiple IBM i7.1
partitions. The system contains a PC #5774 - 4Gb fibre adapter and uses an IBM fibre switch. All
IBM i partitions are hosted by VIO Server (VIOS).
How could the administrator configure the sharing of the tape library?
A. Configure NPIV within VIOS, then configure each partition to use NPIV to share the tape library.
B. Create a script that can be called after each backup job in a partition finishes, which will move
the fibre adapter to the next partition
C. In the HMC, select the host Power System, then select Operations - Schedule Operations -
New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter
between partitions.
D. In the HMC, select the VIOS partition, then select Operations - Schedule Operations - Options -
New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter
between partitions.
Answer: B
IBM certification A4040-121 certification A4040-121 certification A4040-121
NO.8 A customer has multiple POWERS 570 servers. The servers are controlled by multiple HMCs.
The customer is installing an additional Power 770 server in this environment but will retain their
existing HMCs. No updates to FSP or HMC levels have been made since installation of the
POWERS servers.
After reviewing the cover letters for ESP and HMC firmware levels, what updates are required to
support the addition of the new server into the network?
A. Update only the HMCs to the latest version.
B. Update only the FSPs to the latest release available.
C. Update the FSP5 and HMC5 of the existing systems to the minimum level required.
D. Update the POWERS ESPs to the most recent version available for the installed firmware
release. Update the HMCs to the most recent release available.
Answer: C
IBM examen certification A4040-121 A4040-121 examen A4040-121
没有评论:
发表评论