Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test SAP C-TBIT44-71, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test SAP C-TBIT44-71 sans aucune doute si vous choisissez le Pass4Test.
Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test SAP C-TBIT44-71. Cet outil de formation est convenable pour les candidats de test SAP C-TBIT44-71. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.
Code d'Examen: C-TBIT44-71
Nom d'Examen: SAP (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1))
Questions et réponses: 80 Q&As
L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification SAP C-TBIT44-71. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification SAP C-TBIT44-71.
Le Certificat de SAP C-TBIT44-71 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification SAP C-TBIT44-71, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test C-TBIT44-71 sans aucun éffort, en même temps, le test de SAP C-TBIT44-71 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test SAP C-TBIT44-71 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
C-TBIT44-71 Démo gratuit à télécharger: http://www.pass4test.fr/C-TBIT44-71.html
NO.1 The communication between the Integration Server and the backend applications can
be achieved
without adapters.
Which message protocol should you use for this communication type?
A. RFC-XML
B. PI-SOAP Protocol
C. File
D. JDBC 2.0
Answer: B
SAP certification C-TBIT44-71 certification C-TBIT44-71
NO.2 You have implemented a scenario where IDocs are posted to an ERP system using the
receiver IDoc
adapter.
Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?
A. IDoc packages are not supported, unless all IDocs are collected by BPM.
B. Specific fields in the IDoc control record can be overwritten using the 'header mapping'
functionality in
the Receiver Agreement.
C. Quality of service EOIO (exactly once in order) is supported, provided that the target
system is a SAP
Web AS 6.40 or above.
D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best
effort) and EO
(exactly once) can be used.
E. A receiver communication channel must be defined in the Integration Builder.
Answer: B,C,E
SAP C-TBIT44-71 examen C-TBIT44-71 C-TBIT44-71
NO.3 Which Process Integration objects can be used in an integration process?
A. All objects displayed in the navigation area of the Integration Builder.
B. All objects within the software component version of the integration process.
C. Only the objects within the namespace of the integration process.
D. All objects displayed in the Process Integration Scenario using this process.
Answer: B
SAP examen C-TBIT44-71 C-TBIT44-71
NO.4 Assume that your customer has a scenario in which a database table needs to be
queried (i.e. to
perform a SELECT statement and obtain the result set).
What are the viable options for implementing this with the PI JDBC adapter?
A. Use the sender JDBC adapter to query the database asynchronously.
B. Use the sender JDBC adapter to query the database synchronously.
C. Use the receiver JDBC adapter to query the database synchronously.
D. Use the receiver JDBC adapter to query the database asynchronously.
Answer: A,C
certification SAP C-TBIT44-71 C-TBIT44-71 examen certification C-TBIT44-71 C-TBIT44-71 C-TBIT44-71
NO.5 A special aspect in B2B business processes is that the business partners involved in
these processes
do not usually provide information about their internal system landscape.
Which configuration objects are relevant for B2B configuration?
A. Receiver Determination
B. Communication Party
C. Software Component Version (SWCV)
D. Communication Channel
Answer: A,B,D
SAP examen C-TBIT44-71 C-TBIT44-71 C-TBIT44-71 examen
NO.6 You configure the sender RFC adapter to convert RFC calls from a sender to XML
messages. These
XML messages are then sent to the Integration Server or to the PCK.
What is the purpose of the RFC adapter parameter "Program ID"?
A. The Program ID is a unique identifier for outbound proxies.
B. The Program ID must uniquely describe the RFC sender communication channel in the
configured
application server gateway.
C. The Program ID identifies proxy classes for Service Interfaces.
D. The Program ID is used in correlation for binding abstract interfaces.
Answer: B
SAP C-TBIT44-71 C-TBIT44-71
NO.7 If a system error occurs in a send step, an alert can be triggered for Alert Management
and the
integration process should then be terminated.
Where do you define the Alert Category for the appropriate Control Step?
A. Within the SLD
B. Within the transaction ALRTCATDEF on the Integration Server
C. Within the Enterprise Services Builder
D. Within the Process Editor
Answer: B
certification SAP C-TBIT44-71 certification C-TBIT44-71
NO.8 You can create multiple configurations for one Integration Process without changing the
appropriate
process definition.
Which of these parameters allows you to achieve this behavior?
A. Process Signature
B. Container Definition
C. Correlation
D. Configurable Parameters in Conditions
Answer: D
SAP C-TBIT44-71 examen C-TBIT44-71 examen certification C-TBIT44-71
NO.9 Which of these operations can be performed by a Container Operation step?
A. Incrementing a counter variable.
B. Appending a message to a multiline container element.
C. Removing a message from a multiline container element.
D. Setting the value of an XML element of a message.
Answer: A,B
SAP examen C-TBIT44-71 C-TBIT44-71 C-TBIT44-71
NO.10 You have created a deadline branch. When the deadline has expired, the integration
process should be
canceled.
How can this be achieved?
A. In the deadline branch, insert a control step that cancels the process.
B. The process is automatically stopped once the deadline has expired.
C. As the process can only be stopped by the administrator, a control step that raises an alert
to inform
the administrator has to be inserted.
D. Insert a switch with an appropriate condition to stop the process.
Answer: A
certification SAP C-TBIT44-71 C-TBIT44-71
NO.11 The PI Mail adapter is used to send and receive emails. Which protocols are
supported?
A. SMTP
B. HTTP
C. IMAP4
D. POP3
Answer: A,C,D
SAP C-TBIT44-71 examen C-TBIT44-71
NO.12 You are implementing an IDoc-based scenario using SAP Netweaver PI and more
specifically the
sender IDoc adapter.
Which of these steps are mandatory for the sender IDoc adapter to function properly?
A. IDoc metadata must be imported into the Enterprise Services Repository.
B. The Logical System name (ALE name) for the Business System must be defined in the
SLD.
C. A sender communication channel must be defined in the Integration Builder.
D. An RFC destination must be defined on the sender system, pointing to the Integration
Server client.
Answer: A,B,D
SAP C-TBIT44-71 C-TBIT44-71
NO.13 Which statements are correct when using the Receiver File adapter to process XML
messages?
A. The messages are processed based on a poll cycle.
B. The adapter can convert the XML payload into a flat file.
C. The adapter can FTP the file to a remote directory.
D. The quality of service can be 'best effort' (BE) only.
Answer: B,C
SAP C-TBIT44-71 certification C-TBIT44-71
NO.14 To react to situations where it is not possible or not advisable to continue a process in
the normal way,
you can define exceptions.
Which statements correctly describe the triggering of exceptions?
A. A synchronous or asynchronous Send step can trigger an exception when a system error
occurs.
B. Every step type can trigger an exception when a permanent error occurs.
C. A Control step can trigger an exception.
D. A Transformation step can trigger an exception.
E. Exceptions can only be triggered by Control steps.
Answer: A,C,D
SAP C-TBIT44-71 examen C-TBIT44-71 examen C-TBIT44-71
NO.15 For the delivery mode of an integration process, you can choose between inbound
processing with or
without buffering.
Which of these statements correctly describes the Inbound processing mode?
A. SAP recommends the mode for inbound processing with buffering.
B. SAP recommends the mode for inbound processing without buffering.
C. If you select inbound processing without buffering, the qRFC entry returns an error when a
message is
to be delivered to a process instance for which no receive step is active.
D. If you select inbound processing with buffering and there is no active receive step
available to receive
an incoming message, the message is buffered in a separate, process-instance-specific
queue.
Answer: B,C,D
SAP examen C-TBIT44-71 examen C-TBIT44-71 C-TBIT44-71 C-TBIT44-71
La Q&A de Pass4Test vise au test Certificat SAP C-TBIT44-71. L'outil de formation SAP C-TBIT44-71 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.
没有评论:
发表评论