Pour réussir le test IBM 000-374 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test IBM 000-374. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test IBM 000-374 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test IBM 000-374 à se preuver. Mais le taux du succès et bien bas. Participer le test IBM 000-374 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Vous avez aussi la possibilité à réussir le test IBM 000-374. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Code d'Examen: 000-374
Nom d'Examen: IBM (IBM WebSphere MQ V7.0, System Administration)
Questions et réponses: 111 Q&As
Pass4Test est un catalyseur de votre succès de test IBM 000-374. En visant la Certification de IBM, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test IBM 000-374, la Q&A IBM 000-374 est un bon choix pour vous.
Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification IBM 000-374. Le guide d'étude de Pass4Test comprend les excercices de IBM 000-374 et la Q&A qui peut vous permetrre à réussir 100% le test IBM 000-374. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
000-374 Démo gratuit à télécharger: http://www.pass4test.fr/000-374.html
NO.1 An administrator using WebSphere MQ Explorer is unable to connect to queue manager PROD after it
has been migrated, and receives error message SYSTEM.MQEXPLORER.REPLY.MODEL not defined.
Which command will refresh the existing system objects to resolve this issue?
A. strmqm c PROD
B. strmqm a PROD
C. strmqm ss PROD
D. strmqm si PROD
Answer: A
IBM 000-374 examen 000-374 examen certification 000-374
NO.2 An administrator has created the following MQ objects on two systems:
SYSTEM A
crtmqm -C "VEGGIE QUEUE MANAGER" -LL -Q -D POTATO VEGGIE
DEFINE QR(APPLE) RQMNAME(FRUIT) RNAME(PEACH)
DEFINE QL(DLQ)
DEFINE QL(POTATO) USAGE(XMITQ)
DEF CHL('VEGGIE. FRUIT') CHLTYPE(SDR) TRPTYPE(TCP) CONNAME('9.84.100.7(1414)') +
XMITQ('POTATO')
SYSTEM B
crtmqm -C "FRUIT QUEUE MANAGER" -LL -Q -D GRAPE FRUIT
DEFINE QL(GRAPE) USAGE(XMITQ)
DEFINE QL(PEACH)
DEF CHL('VEGGIE. FRUIT') CHLTYPE(RCVR) TRPTYPE(TCP)
An application connects to queue manager VEGGIE and puts a message to queue APPLE. On which
queue does the message get delivered before it gets picked up by the sender channel?
A. POTATO
B. APPLE
C. GRAPE
D. PEACH
Answer: A
IBM 000-374 examen 000-374
NO.3 A legacy application uses MQPUT to send messages to a queue INV. Which set of MQSC commands
below will successfully configure the queue manager so that a number of
JMS applications can receive these messages by subscribing to topic Inventory/CurrentItems?
A. DEFINE TOPIC(INV_TOPIC) + TOPICSTR(Inventory/CurrentItems)DEFINE QALIAS(INV)
TARGET(INV_TOPIC) TARGTYPE(TOPIC)
B. DEFINE TOPIC(INV_TOPIC) + TOPICSTR(Inventory/CurrentItems)DEFINE TALIAS(INV)
TARGET(INV_TOPIC) TARGTYPE(TOPIC)
C. DEFINE TOPIC (INV_TOPIC) + TOPICSTR(Inventory/CurrentItems) QALIAS(INV)
D. DEFINE QALIAS(INV) TARGET(Inventory/CurrentItems) + TARGTYPE(TOPIC)
Answer: A
certification IBM 000-374 000-374
NO.4 Which of the following statements are true, regarding applications that communicate via
IBMWebSphere MQ?
IBM WebSphere MQ applications have to agree upon:
A. the platforms they are running on
B. the name(s) of the queue(s) used
C. the maximum number of messages sent within a given time period
D. the layout of the message data exchanged
E. the network protocol used
Answer: BD
certification IBM 000-374 examen 000-374 000-374 certification 000-374
NO.5 What are the advantages of using queue-sharing groups in IBM WebSphere MQ?
A. workload balancing, remote administration
B. improved performance, ease of monitoring
C. scalability, end-to-end security, data integrity
D. scalability, high availability, workload balancing
Answer: D
IBM 000-374 examen certification 000-374 000-374 examen 000-374
NO.6 An administrator has created a queue manager on AIX system A, using the command crtmqm ll QMA.
What command will create a backup queue manager for QMA on AIX system B?
A. crtmqm ll QMB
B. crtmqm ll QMA
C. crtmqm lb QMA
D. crtmqm ll backup QMA
Answer: B
IBM 000-374 certification 000-374 certification 000-374
NO.7 A company running IBM WebSphere MQ V5.3 on UNIX upgraded to IBM WebSphere MQ V7.0.
Immediately after the migration, what is the administrator expected to do?
Start the:
A. MQSeries service
B. queue manager and listener simultaneously
C. queue manager before starting the listener
D. listener before starting the queue manager
Answer: C
IBM 000-374 000-374 000-374 000-374
NO.8 Which of the following are performance enhancements to the Java Message Service provider
implementation in IBM WebSphere MQ V7.0?
A. Read Ahead
B. Support for channel exits written in C/C++
C. Asynchronous Put
D. Message selection performed by Queue Manager
E. Ability to access all MQMD fields for IBM WebSphere MQ messages.
Answer: ACD
certification IBM certification 000-374 000-374 000-374 examen 000-374
NO.9 An administrator wants to prevent the channel initiator process from starting when a queue manager
QMA on AIX is started.
Which action(s) will accomplish this?
A. Restart the queue manager using strmqm ns QMA.
B. Restart the queue manager using strmqm chinit no QMA.
C. Issue the command ALTER QMGR SCHINIT(DISABLED), then restart the queue manager using
strmqm QMA.
D. Edit the file qm.ini for QMA and add an entry ChannelInitiator = No in the CHANNELS stanza, then
restart the queue manager using strmqm QMA
Answer: A
IBM 000-374 certification 000-374 000-374 examen
NO.10 What are the four predefined message types?
A. Request, response, publication, datagram
B. Publication, subscription, request, response
C. Request, reply, report, datagram
D. Request, broadcast, acknowledgment, response
Answer: C
certification IBM 000-374 000-374 000-374
NO.11 An administrator has been asked to determine which files are needed to restart a queue manager
configured with linear logging.
Which of the following MQSC commands will determine which log files are still required?
A. DISPLAY QMGR
B. DISPLAY QMSTATUS
C. DISPLAY QMSTATUS ALL
D. DISPLAY QMGR RESTART
Answer: C
IBM 000-374 examen 000-374
NO.12 An application deployed on z/OS was causing frequent abends.
Which of the following options from the IPCS Dump Component Panel can an administrator use to
analyze
the problem?
A. CSQWDMP
B. ASMCHECK
C. DIVDATA
D. DAEDATA
Answer: A
certification IBM certification 000-374 000-374 000-374 examen 000-374 examen
NO.13 Which features of IBM WebSphere MQ specifically provide robust message transport?
A. Data integrity, security, parallel processing
B. Asynchronous delivery, once and once-only delivery, persistent messaging
C. Time independence, no duplicate delivery, synchronous processing
D. Assured delivery, application parallelism, time dependent applications
Answer: B
certification IBM certification 000-374 000-374
NO.14 An administrator will install IBM WebSphere MQ on an AIX platform. There is a requirement to
configure
the installation to store the queue managers data files under a directory tree different from the default
specified by the installation.
After creating the appropriate directory tree, the administrator should:
A. specify the file location using the -ld option when running the crtmqm command.
B. add an entry for the variable MQSPREFIX in /var/mqm/service.env before running the crtmqm
command.
C. edit /var/mqm/mqs.ini to specify LogDefaultPath in the LogDefaults stanza before running the crtmqm
command.
D. edit /var/mqm/mqs.ini to specify DefaultPrefix in the AllQueueManagers stanza before running the
crtmqm command.
Answer: D
IBM 000-374 examen 000-374 000-374
NO.15 An administrator has been asked to create a queue manager alias for QM1 to be used for
communication
between remote queue managers.
What MQSC command will create the queue manager alias?
A. DEF QR(QM1.ALIAS) RNAME('Q1') RQMNAME(' ') XMITQ(QM1)
B. DEF QR(QM1.ALIAS) RNAME(' ') RQMNAME(QM1) XMITQ(QM1)
C. DEF QR(QM1.ALIAS) RNAME('Q1') RQMNAME(QM1) XMITQ(' ')
D. DEF QL(QM1.ALIAS) RQMNAME(QM1)
Answer: B
IBM examen 000-374 examen certification 000-374
NO.16 For the Solaris platform, which databases are supported as a resource manager in transactions
coordinated by IBM WebSphere MQ V7.0?
A. Oracle, Derby, My SQL
B. DB2, Derby, Teradata
C. DB2, Oracle, Informix, Sybase
D. DB2, SQL Server, Sybase, Informix
Answer: C
IBM 000-374 certification 000-374 000-374 000-374 000-374 examen
NO.17 Which two user profiles are mandatory to correctly run IBM WebSphere MQ on i5/OS?
A. QMQM, QMQMADM
B. QMQMADIM, mqm
C. mqm, QMQM
D. mqm, MUSR_MQADMIN
Answer: A
IBM 000-374 examen certification 000-374 000-374 000-374 examen
NO.18 An administrator created a queue manager Paint.queue.manager on AIX with circular logging. The
administrator then was told that the system will be used for production, so the logging needs to be
switched to linear.
How can the administrator make this change?
A. Edit "/var/mqm/mqs.ini" and change LogType=LINEAR
B. Edit "/var/mqm/qmgrs/Paint.queue.manager/qm.ini" and change LogType=LINEAR
C. Issue the MQSC command ALTER QMGR LOGTYPE(LINEAR)
D. Recreate queue manager with crtmqm -c "Paint shop" -ll -q Paint.queue.manager
Answer: D
IBM 000-374 examen 000-374 000-374
NO.19 An administrator wants to define a IBMWebSphere MQ object so that the applications can be
prevented from sending messages to the processing applications queue APPQ, but continue to allow
administrators to send test messages to the processing application. The application will send messages
using an object
ABC.
What MQSC command should be used?
A. DEFINE QALIAS(ABC) BASEQ(APPQ)
B. DEFINE QALIAS(ABC) TARGET(APPQ)
C. DEFINE QREMOTE(ABC) TARGET(APPQ)
D. DEFINE QLOCAL(ABC) ALIASQ(APPQ)
E. DEFINE QMODEL(ABC) BASEQ(APPQ)
Answer: B
IBM 000-374 certification 000-374 000-374
NO.20 Which Eclipse version is a prerequisite to use MQ Explorer to administer IBM WebSphere MQ V7.0 on
Windows?
A. 3.3
B. 3.2
C. 3.1
D. 3.0
Answer: A
IBM examen certification 000-374 certification 000-374 000-374 examen
Finalement, la Q&A IBM 000-374 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test IBM 000-374 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification IBM, vous aurez un meilleur salaire et une plus grande space à se développer.
没有评论:
发表评论