2013年8月27日星期二

Le meilleur matériel de formation examen HP HP0-841

Dépenser assez de temps et d'argent pour réussir le test HP HP0-841 ne peut pas vous assurer à passer le test HP HP0-841 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.

Est-ce que vous vous souciez encore de réussir le test HP HP0-841? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de HP HP0-841 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A HP HP0-841. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test HP HP0-841 sans aucune doute.

Le test HP HP0-841 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test HP HP0-841. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Code d'Examen: HP0-841
Nom d'Examen: HP (Designing and Implementing HP SAN Solutions)
Questions et réponses: 187 Q&As

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test HP HP0-841, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.

HP0-841 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-841.html

NO.1 What is the correct statement about zoning in an interoperable fabric?
A.WWPN zoning is the only allowed method.
B.A mixture of domain ID, port number and WWPN zoning is allowed.
C.Domain ID and port number zoning are the only allowed methods.
D.Zoning is not allowed. The only way to segment a fabric is using the VSAN technology of C-Series
switches.
Correct:A

certification HP   HP0-841 examen   HP0-841

NO.2 In the SAN configuration, assume a goal of redundancy for everything. How many Storage
Management Appliances are needed?
A.1
B.2
C.4
D.6
Correct:B

certification HP   HP0-841 examen   HP0-841

NO.3 Which three infrastructure components are supported from multiple vendors in an HP Open
heterogenous SAN? (Choose three.)
A.hubs
B.switches
C.ATM gateways
D.storage systems
E.operating systems
Correct:B D E

certification HP   HP0-841 examen   HP0-841

NO.4 Which three operating systems are supported in an HP heterogeneous SAN? (Choose three.)
A.HP NSK
B.IBM AIX
C.IBM OS400
D.Tru64 UNIX
E.Microsoft Windows 2003 Server
Correct:B D E

certification HP   HP0-841 examen   HP0-841

NO.5 Three LUNs, sda, sdb and sdc, are connected to a Linux server. You shutdown the server and
physically remove sdb. What happens after the server reboots?
A.The LUNs sda and sdc are accessible, LUN sdb is not listed in the device scan.
B.The LUN sda is accessible, LUN sdc is now sdb and accessible using this name.
C.The LUNs sda and sdc are accessible, LUN sdb is listed as offline in the device scan.
D.The LUNs sda and sdc are accessible, LUN sdb is renamed into sdvb simulating a virtual device.
Correct:B

certification HP   HP0-841 examen   HP0-841

NO.6 What is the maximum distance per cable segment using 9/125 micron single-mode cable and
long wavelength 2 Gb SFPs?
A.1 km
B.5 km
C.10 km
D.35 km
E.100 km
Correct:C

certification HP   HP0-841 examen   HP0-841

NO.7 Which software module of HP OpenView Storage Area Manager (SAM) can you use to control
the access of a managed host to a managed storage device?
A.Storage Builder
B.Storage Allocater
C.Storage Accountant
D.Storage Node Manager
Correct:B

certification HP   HP0-841 examen   HP0-841

NO.8 What can you do to minimize communication delays between a host and its storage subsystem?
A.cross couple multiple ISLs
B.ensure there is at least one switch hop
C.connect the two devices to the same switch
D.configure a maximum of four active host ports per ISL
Correct:C

certification HP   HP0-841 examen   HP0-841

NO.9 Which statement applies to trunking on B-Series switches?
A.Oversubsciption is impossible with trunking.
B.If one ISL of a trunk fails, the whole trunk fails.
C.Trunking increases the availability because an I/O is not interrupted, even if the master ISL of a trunk
fails.
D.Trunking is more effecient than individual ISLs because it is less probable that congestion will be
experienced.
Correct:D

certification HP   HP0-841 examen   HP0-841

NO.10 The sum of the wait time (in queues) and the service time is _____.
A.data rate
B.request rate
C.response time
D.utilization time
Correct:C

certification HP   HP0-841 examen   HP0-841

NO.11 What characteristic has the greatest impact on disk performance?
A.bus type
B.drive latency
C.I/O transfer size
D.upgrade from a 1Gb/s HBA to a 2Gb/s HBA
Correct:B

certification HP   HP0-841 examen   HP0-841

NO.12 What is a Fibre Channel fabric?
A.one or more switches connected together, sharing the same name and routing table
B.two or more switches connected together, sharing the same name and routing table
C.one or more switches connected together, each having its own independent name and routing table
D.two or more switches connected together, each having its own independent name and routing table
Correct:A

certification HP   HP0-841 examen   HP0-841

NO.13 Which HP SAN Management tool is a highly scalable, Java-based application that manages
multiple B-Series switches and fabrics in real-time?
A.HP StorageWorks Fabric Manager
B.Management Appliance Software v2.1
C.HP OpenView Storage Node Manager
D.HP StorageWorks High Availability Fabric Manager (HAFM)
E.HP OpenView Storage Management Appliance III and HP OpenView Storage Management Appliance
software v2.1
Correct:A

certification HP   HP0-841 examen   HP0-841

NO.14 What is the internal M-series switch latency of a HP Fibre Channel switch?
A.between 1us and 2us maximum
B.3us
C.5us
D.33us
E.650us
Correct:A

certification HP   HP0-841 examen   HP0-841

NO.15 What are HP SAN management strategies? (Choose two.)
A.automated policy based management
B.policy based backup using the storage management appliance
C.automatic performance optimization using sophisticated high performance management agents
D.storage virtualization using in-band management functionality of the storage management appliance
E.simplified, centralized storage management using standardized web based GUIs residing on a storage
management appliance
Correct:A E

certification HP   HP0-841 examen   HP0-841

NO.16 What are the three types of fabric zoning on B-series switches? (Choose three.)
A.static zoning
B.software zoning
C.hardware zoning
D.mixmode zoning
E.QuickLoop zoning
Correct:B C D

certification HP   HP0-841 examen   HP0-841

NO.17 In a single fabric, when multiple paths exist between a host and its storage, which statement is
true?
A.The result could be an unstable fabric.
B.Load sharing is automatically set to static.
C.The FSPF protocol determines best route.
D.The path used is determined by port priority.
Correct:C

certification HP   HP0-841 examen   HP0-841

NO.18 A company is running an application that is READ intensive. They are more concerned with
effective READ performance than WRITE performance. They have a limited number of disks so
they need to minimize RAID overhead. What type of RAID should they use?
A.RAID 0
B.RAID 1
C.RAID 1+0
D.RAID 5
Correct:D

certification HP   HP0-841 examen   HP0-841

NO.19 What is throughput?
A.the number of requests processed per second
B.the number of I/O requests satisfied per unit of time
C.the amount of time a device needs to process a request
D.the time a device takes to process a request from issuance to completion
Correct:B

certification HP   HP0-841 examen   HP0-841

NO.20 In Web Tools, which is a valid switch state?
A.down
B.marginal
C.segmented
D.reconfiguring
Correct:A

certification HP   HP0-841 examen   HP0-841

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification HP HP0-841 via son guide d'étude. Est-ce que vous vous souciez de test Certification HP HP0-841? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

没有评论:

发表评论