Le dernier examen Nortel 920-433 gratuit Télécharger

C'est pas facile à passer le test Certification Nortel 920-433, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Nortel 920-433 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Nortel 920-433, vous allez passer le test Nortel 920-433 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

Passer le test Nortel 920-433, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification Nortel 920-433. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification Nortel 920-433.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Nortel 920-433 à la première fois.

Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Nortel 920-433. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Nortel 920-433.

Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Nortel 920-433, et aussi une meilleure assurance du succès du test 920-433. Vous choisissez Pass4Test, vous choisissez le succès.

Code d'Examen: 920-433
Nom d'Examen: Nortel (Comm Svr 1000 Upgrades to Rls.5.0 for Techs, Linux and Apps)
Questions et réponses: 85 Q&As

Selon les anciens test Nortel 920-433, la Q&A offerte par Pass4Test est bien liée avec le test réel.

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Nortel 920-433 très tôt. Pass4Test peut vous permettre à réussir 100% le test Nortel 920-433, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

920-433 Démo gratuit à télécharger: http://www.pass4test.fr/920-433.html

NO.1 A customer has upgraded to Communication Server 1000E Rls. 5.0 and is using the Management Tool
NRSM on Linux. In conducting a search for Routing Entries, the engineer is looking for a specific number
range. The engineer wants to secure all entries from the entire service domain and identify specific end
points where they terminate. What is a more efficient procedure for searching for Routing Entries?
A. Enter the specific DN type + the entire scope searching.
B. Enter *56* (considered a wild card) + the entire scope searching.
C. Enter #56# (considered a wild card) + the entire scope searching.
D. Enter the specific service domain + the entire service domains to specific endpoints.
Answer: B

Nortel   920-433   920-433   920-433 examen

NO.2 A customer is upgrading to a Communication Server 1000E Rls. 5.0. Which hardware components
also provide DSP services? (Choose two.)
A. 32-port DSP Daughterboard
B. 96-port DSP Daughterboard
C. 128-port DSP Daughterboard
D. Media Gateway Controller card (MC32B)
Answer: AB

Nortel   920-433   920-433 examen   920-433   920-433

NO.3 A customer is upgrading to Communication Server 1000E Rls. 5.0. During their database configuration,
they need to ensure that the Emergency Services for Client Mobility feature is supported, but they are
uncertain whether their upgrade supports this application. What prompt(s) should be enabled, and what
configuration is needed to ensure this support?
A. ESA must be disabled. Emergency Response Location (ERL), Emergency Caller Location (ECL) and
internal Location Information Service (Package 336) must be programmed.
B. ESA Package 329 must be enabled and programmed, allowing the Emergency Response Location
(ERL) and Emergency Caller Location (ECL) and internal Location Information Service (Package 336) to
be used.
C. New System Type 4021 must be activated before the Emergency Response Location (ERL) and
Emergency Caller Location (ECL) appear in Web Station.
D. The addition of HA Package 410 must be activated before the Emergency Response Location (ERL)
and Emergency Caller Location (ECL) appear in Web Station.
Answer: B

Nortel   920-433   920-433   920-433   920-433

NO.4 A customer is upgrading to Communication Server 1000E Rls. 5.0. The customer wants to take
advantage of Secure Media Exchange (SRTP) so voice conversations are secure. What needs to occur
for Media Security to be provided?
A. IP Phones Phase 1 must be using the DSPs located on the MGC and MC32S cards only.
B. IP Phones Phase 2 must be using the DSPs located on the Voice Gateway Media Cards only.
C. IP Phones Phase 0 must be using the DSPs located on the MGC and MC32S cards only.
D. IP Phones Phase 2 must be using the DSPs located on the MGC and MC32S cards only
Answer: D

Nortel examen   certification 920-433   certification 920-433

NO.5 A customer is upgrading to a Communication Server 1000E Rls. 5.0. To take advantage of features
supported by the Enterprise Common Manager (ECM) framework, which systems can be deployed as the
ECM? (Choose two.)
A. VxWorks Operating System and ISP 1100
B. Linux Operating System and IBM x306m
C. Linux Operating System and HP DL 320
D. VxWorks Operating System and HP DL 320
E. VxWorks Operating System and IBM x306m
Answer: BC

Nortel   920-433 examen   920-433   certification 920-433

NO.6 A customer has upgraded from a Communication Server (CS) 1000S to a CS 1000E Standard
Availability (SA). Due to their projected company and network growth, they are contemplating upgrading
to a CS 1000E High Availability (HA) system. Which component(s) differentiate a HA system from a SA
system?
A. a second CP-PM
B. enabling the HA software package
C. a second CP-PM and a CP-PM Call Server
D. a second CP-PM and enabling the HA software package
Answer: D

certification Nortel   920-433   920-433 examen

NO.7 A customer has multiple Communication Server (CS) 1000Es. When calls are placed on hold, they
want to provide the same music network-wide to their calls. Which configuration is needed for this
support?
A. Network Music is provided only to those calls that are transferred to the music source using Release
Link Trunk over H.323.
B. Music Trunks are installed only on the primary node, connecting to an analog TIE trunk using
H.323/SIP virtual trunks. Only calls placed on hold at the primary node will receive this specific music
source.
C. Network Time Protocol (NTP) which is used to synchronize local clocks across the network to a single,
accurate, third party NTP server, such as a radio clock.
D. Music Trunks are installed on the remote nodes and connected back-to-back with an analog TIE trunk,
which is auto-terminated to the primary DN of a Network Music Agent. When a music trunk is seized, the
call is connected to the Audio Server through an H.323/SIP virtual trunk. A network music path is then
established.
Answer: D

certification Nortel   certification 920-433   920-433   920-433   920-433

NO.8 A customer is upgrading to Communication Server 1000E from Rls. 4.5 to Rls. 5.0 and is requesting
Survivable Media Gateways in their network. Which packages support this functionality? (Choose two.)
A. Package 409 for Global Plugins
B. Package 410 for CP PM Server High Availability
C. Package 404 for GRPRIM for the Primary System
D. Package 405 for GRSEC for the Secondary System
E. Package 499 for SSC Survivable Media Gateway
Answer: CD

certification Nortel   920-433 examen   certification 920-433

NO.9 A customer is upgrading to Communication Server 1000E Rls. 5.0 and needs additional temporary IP
User Licenses for controlled load sharing between two systems. Which statement is true regarding the
licenses to be ordered and the use of additional IP User Licenses?
A. No additional licenses need to be ordered. If the customer runs out of IP User Licenses for the 1150E,
they can use the Basic IP User Licenses.
B. Basic IP User Licenses must be ordered. Regular IP Licenses will be used if the temporary license
count is exceeded.
C. Regular IP User Licenses must be ordered. Basic IP User Licenses will be used if the temporary
license count is exceeded.
D. Temporary User Licenses should be ordered. Basic IP or Regular IP User Licenses will be used if the
temporary license count is exceeded.
Answer: D

Nortel   certification 920-433   920-433

NO.10 A customer is upgrading from a Communication Server 1000S to Communication Server 1000E Rls.
5.0 and requires a High Availability configuration. Which package must be in place for this to occur?
A. Package 329 for ESA
B. Package 410 for CP-PM Servers
C. Package 404 for GRPRIM for Primary System
D. Package 405 for GRSEC for Secondary System
Answer: B

Nortel   920-433   certification 920-433

NO.11 A customer is upgrading from a Meridian Option 11C to a Communication Server (CS) 1000E Rls. 5.0
Standard Availability. What happens to the Terminal Numbers (TNs) during the upgrade?
A. The Small System (Card-Unit) TNs are retained.
B. The TNs are automatically converted to the Large System format (Loop - Shelf - Card - Unit) for all
assigned TNs.
C. The TNs are manually changed to the Large System format (Loop - Shelf -Card - Unit) by
re-programming all devices assigned TNs.
D. The TNs for only the IP Phones are automatically converted to the Large System format (Loop - Shelf -
Card - Unit). All other devices assigned TN must be manually re-programmed.
Answer: B

certification Nortel   920-433   920-433

NO.12 A customer is upgrading to Communication Server (CS) 1000E Rls. 5.0. The customer wants to utilize
TLS for SIP traffic security in their network. What security does TLS provide?
A. TLS provides audio encryption between SIP clients only.
B. TLS provides audio encryption between Unistim clients only.
C. TLS provides signaling encryption between all SIP endpoints.
D. TLS provides signaling encryption between all system clients.
Answer: C

Nortel examen   certification 920-433   920-433

NO.13 A customer is upgrading a Communication Server 1000S to a Communication Server 1000E Rls. 5.0.
Which hardware component replaces the Media Gateway 1000S controller card?
A. DSP Daughterboard
B. Media Card 32 Port Security
C. No hardware change required.
D. Media Gateway Controller card
E. Call Processor Pentium Mobile
Answer: D

Nortel examen   920-433 examen   920-433   certification 920-433   920-433   920-433 examen

NO.14 A customer is upgrading from Communication Server 1000E Rls. 5.0 Standard Availability to
Communication Server 1000E Rls. 5.0 High Availability. In addition to a Media Gateway 1000E, what
configuration must be in place for this to occur?
A. A CP-PM and an MGC
B. A CP-PM CS, an MGC, and package 410 High Availability
C. A CP-PM CS, CP-PM SS, an MGC, and package 405 GRSEC
D. A CP-PM CS with either a CP-PM SS, ISP 1100 or COTS VxWorks SS, and an MGC, and package
410 High Availability
Answer: D

Nortel   920-433   certification 920-433   920-433 examen   920-433 examen

NO.15 A customer is upgrading to Communication Server 1000E Rls. 5.0. With this configuration, they will be
using all of the Management Features; however, they are currently at Optivity Telephony Manager (OTM)
Rls. 2.2. What is the upgrade path for the most current Telephony Manager (TM) offering, and what will
occur to the database during the upgrade?
A. Only an upgrade from OTM Rls. 2.2 to TM Rls. 3.0 is supported, and the database is automatically
migrated during the upgrade.
B. A direct upgrade from OTM Rls. 2.2 to TM Rls. 3.1 is supported, and the database is automatically
migrated during the upgrade.
C. A direct upgrade from OTM Rls. 2.2 to TM Rls. 3.1 is supported, with the database having to manually
be migrated during the upgrade.
D. Only an upgrade from TM Rls. 3.0 to TM Rls. 3.1 is supported, with the database having to be
manually migrated during the upgrade.
Answer: B

Nortel   certification 920-433   920-433 examen   certification 920-433   920-433

Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.

Pass4Test offre une formation sur Nortel 920-471 matériaux examen

Le test Nortel 920-471 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Nortel 920-471 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Nortel 920-471 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Nortel 920-471 avec l'aide de Pass4Test.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Nortel 920-471. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Nortel 920-471, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Nortel 920-471 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Nortel 920-471 sans aucune doute.

Vous pouvez télécharger tout d'abord une partie de Q&A Certification Nortel 920-471 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Nortel 920-471. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Code d'Examen: 920-471
Nom d'Examen: Nortel (Nortel Converged Office CS 1000 Rls.5.x Config and Networking)
Questions et réponses: 62 Q&As

Le test Nortel 920-471 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Nortel 920-471. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de 920-471, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Nortel 920-471. Votre argent sera tout rendu si vous échouez le test.

920-471 Démo gratuit à télécharger: http://www.pass4test.fr/920-471.html

NO.1 You are configuring a Bandwidth Management zone on a Communication Server 1000 Rls. 5.0 Call
Server using Element Manager (LD 117). The Call Server zones will be used for Intrazone
communications between endpoints (IP telephones and gateways).
Which is the preferred Bandwidth Management strategy, assuming the network has adequate bandwidth?
A. MO
B. VTRK
C. Best Quality (BQ)
D. Best Bandwidth (BB)
Answer: C

Nortel   920-471   920-471   certification 920-471   920-471

NO.2 A large customer needs a Nortel Converged Office solution that will support high availability for their
employees and allows for future growth of the organization. The customer currently has 100,000 users,
and is forecasting a potential growth of up to 10,000 users.
Which Nortel Converged Office deployment option would provide the optimum level of functionality?
A. OCS 2007 Standard Edition Consolidated configuration
B. OCS 2007 Standard Edition Expanded configuration
C. OCS 2007 Enterprise Edition Consolidated configuration
D. OCS 2007 Enterprise Edition Expanded configuration
Answer: D

Nortel examen   920-471   920-471 examen   certification 920-471

NO.3 Which Communication Server 1000 web-based administration application does the Signaling host?
A. Call Server
B. NRS Manager
C. Branch Office
D. Media Gateway
Answer: B

Nortel examen   920-471   920-471 examen

NO.4 The Network Routing Service consists of three basic components: Network Protocol, Database
Synchronization, and Database.
Which component(s) combines a SIP Redirect Server, SIP Registrar, H.323 Gatekeeper, and Network
Connection Service into a single application for network-based routing?
A. Database component
B. Call Server component
C. Network protocol component
D. Database synchronization and database component
Answer: C

Nortel   920-471   920-471 examen   920-471 examen   920-471 examen   920-471

NO.5 You are implementing IP Peer Networking in a network that includes three Communication Server
1000 Rls. 5.0 systems. DN uniqueness cannot be maintained so it will be necessary to route calls using
site Location Codes (LOCs).
Which type of dialing plan is recommended for the call routing scenario?
A. Uniform Dialing Plan (UDP)
B. Flexible Numbering Plan (FNP)
C. Coordinated Dialing Plan (CDP)
D. Network Attendant Numbering Plan
Answer: A

Nortel   920-471 examen   920-471 examen

NO.6 The customer network includes ranges of Directory Numbers that are routed over specific trunk routes
to other nodes in the network via Direct Steering Codes (DSCs) and route lists.
Which type of dialing plan is used?
A. Uniform Dialing Plan (UDP)
B. Flexible Numbering Plan (FNP)
C. Coordinated Dialing Plan (CDP)
D. Network Attendant Numbering Plan
Answer: C

Nortel   920-471   920-471 examen

NO.7 You are using Element Manager to verify the system configuration before implementing IP Peer
Networking.
Which element can you configure or modify using Element Manager, assuming a VxWorks platform?
A. Call Server
B. Hardware watchdog
C. Network Connection Service
D. Basic Input Output System (BIOS)
Answer: A

certification Nortel   920-471   920-471   920-471 examen

NO.8 A company plans to use the Virtual Trunk Interzone traffic. You are programming a bandwidth
management zone on a Communication Server 1000 Rls. 5.0 Call Server using Element Manager (LD
117).
Which is the recommended Bandwidth Management strategy, assuming that bandwidth conservation is
required?
A. MO
B. VTRK
C. Best Quality (BQ)
D. Best Bandwidth (BB)
Answer: D

Nortel   920-471 examen   920-471 examen

NO.9 A customer has a Communication Server (CS) 1000 network that includes three CS 1000E systems
running Rls. 5.0 IP Peer Network. The customer has asked you when Digital Signal Processor (DSP)
resources are required.
How would you respond?
A. when a direct media path is required, without circuit switching
B. when it is necessary to connect to third-party SIP-enabled products
C. when it is necessary to connect to third-party H.323-enabled products
D. when it is necessary to transcode between IP and circuit-switched devices
Answer: D

certification Nortel   920-471   920-471   920-471

NO.10 A company recently deployed IP telephones in its Call Center. During peak traffic conditions, callers
receive an overflow tone and calls are blocked.
Assume the following settings:
Zone Number = 1
Zone Intent = MO
Intrazone Traffic = Best Quality
Interzone Traffic = Best Bandwidth
Resource Type = Shared
Which programming change is recommended in Element Manager (LD 117) to provide dedicated Digital
Signal Processor (DSP) resources to Contact Center IP telephones?
A. Change Zone Intent to VTRK
B. Change Resource Type to Private
C. Change Interzone Traffic to Best Quality
D. Change Intrazone Traffic to Best Bandwidth
Answer: B

Nortel   920-471   920-471   920-471 examen

Le test certification Nortel 920-471 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Nortel 920-471 puisse augmenter la compétition dans ce marché.

Le plus récent matériel de formation Nortel 922-104

Est-ce que vous vous souciez encore pour passer le test Nortel 922-104? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Nortel 922-104, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Nortel 922-104. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Nortel 922-104 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Nortel 922-104 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Nortel 922-104 et passer le test à la première fois.

Code d'Examen: 922-104
Nom d'Examen: Nortel (Communication Server 1000 Rls.6.0 Upgrades for Engineers)
Questions et réponses: 30 Q&As

C'est pas facile à passer le test Certification Nortel 922-104, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Nortel 922-104 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Nortel 922-104, vous allez passer le test Nortel 922-104 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

922-104 Démo gratuit à télécharger: http://www.pass4test.fr/922-104.html

NO.1 A customer is upgrading an existing Communication Server (CS) 1000M with a CPPM Signaling Server
at Rls. 5.0 to a CS 1000M Rls. 6.0. What minimum modification must be made to the Signaling Server?
A.upgrade the Signaling Server software to Rls. 6.0
B.upgrade the Signaling Server memory to 2 GB
C.upgrade the memory to 2 GB and the Signaling Server software to Rls. 6.0
D.replace the CPPM Signaling Server with a new COTS Signaling Server
Answer:C

Nortel   922-104   922-104 examen   922-104 examen   922-104 examen

NO.2 A customer recently upgraded to a Communication Server (CS) 1000E 6.0 HA with two CPPM Call
Server, seven CPPM Signaling Servers, five Geographically Redundant Survivable Media Gateways, and
6000 IP telephones. You decide to test the Triple Registration feature to ensure the system redundancy
feature works. Which registration flow for the Media Gateway Controller describes the Triple Redundancy
feature among the CS 1000 Rls. 6.0 hardware components?
A.Signaling Server> Primary Call Server> Alternate Call Server 1> Alternate Call Server 2.
B.Alternate Call Server 2> Alternate Call Server 1> Primary Call Server.
C.Primary Call Server> Alternate Call Server 1> Alternate Call Server 2.
D.Voice Gateway Media Card> Leader Signaling Server> Follower Signaling Server 1> Follower
Signaling Server 2.
Answer:C

certification Nortel   922-104   922-104 examen   certification 922-104

NO.3 A customer is upgrading a Communication Server (CS) 1000E Rls. 5.5 system to a Communication
Server (CS) 1000E Rls. 6.0 system in a geographically-distributed Survivable Media Gateway (SMG)
environment. They want to provide backup Terminal Proxy Server (TPS) services for users at the SMG
site in case of a WAN failure. Which component provides backup TPS services?
A.DSP Daughterboard
B.Local SMG Leader Signaling Server
C.Media Card 32-port (MC32)
D.Media Card 32-port S (MC32S)
Answer:B

Nortel   922-104 examen   922-104   922-104

NO.4 You are designing a Survivable Media Gateway geographic redundant solution including a
Communication Server 1000E HA Rls. 6.0 system with CPPM Call Servers. The customer requires the
use of the maximum number of supported media gateways. How many survivable media gateways can
participate in automated database duplication?
A.28
B.30
C.48
D.49
Answer:C

Nortel   certification 922-104   922-104 examen   922-104   922-104

NO.5 A customer is migrating a Media Gateway (MG) 1000B Rls. 4.5 to a Communication Server (CS) 1000E
Rls. 6.0 Co-resident system. The current MG 1000B contains one Media Card. Which card(s) will
Enterprise Configurator (EC) provision to replace the SSC card?
A.CPPM Co-resident card and a MGC card
B.CPPM Co-resident card and a MGC card with 32-port daughterboard
C.CPPM Co-resident card and a MGC card with 96-port daughterboard
D.CPPM Co-resident card, a MGC card with 96-port daughterboard, and a 32-port daughterboard
Answer:D

Nortel   922-104   922-104 examen   922-104 examen   certification 922-104   922-104

Pass4Test est un bon site d'offrir la facilité aux candidats de test Nortel 922-104. Selon les anciens test, l'outil de formation Nortel 922-104 est bien proche de test réel.

Le plus récent matériel de formation examen Nokia NO0-002 de certification

Le test certification Nokia NO0-002 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Nokia NO0-002 puisse augmenter la compétition dans ce marché.

Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Nokia NO0-002 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Nokia NO0-002.

Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Nokia NO0-002. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Nokia NO0-002.

Code d'Examen: NO0-002
Nom d'Examen: Nokia (Nokia Security Administrator )
Questions et réponses: 98 Q&As

Il demande les connaissances professionnelles pour passer le test Nokia NO0-002. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Nokia NO0-002, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

NO0-002 Démo gratuit à télécharger: http://www.pass4test.fr/NO0-002.html

NO.1 When using voyager what will make permanent changes after a reboot (Choose
one):
A. Clicking apply
B. Clicking apply and then save
C. Saving changes from advanced fw config
D. Clicking apply and rebooting the NAP
Answer: B

Nokia   certification NO0-002   certification NO0-002
Clicking apply only saves changes to the running configuration. Which are overwritten at
startup by /config/db/inital

NO.2 The Default priority for VRRP:
A. 100
B. 10
C. 110
D. 1
Answer: A

Nokia   NO0-002   certification NO0-002   certification NO0-002   certification NO0-002   NO0-002

NO.3 What is the correct flow of data on a NAP. Consider there is a fresh installation of
Checkpoint NG installed (Choose the best answer):
A. Wire - Ethernet Driver - FWrulebase - Routing- NAT- Ethernet Driver -Wire
B. Wire - Ethernet Driver -FW rulebase&NAT - Routing- FW1- Ethernet Driver- Wire
C. Wire - FW Rulebase - Routing - NAT - Ethernet Driver - Wire
D. Wire - FW1rulebase - NAT - Routing - Ethernet Driver - Wire
Answer: B

Nokia   NO0-002 examen   certification NO0-002   NO0-002

NO.4 What commands can display interface statistics (Choose one):
A. Ifconfig -a (iclid)
B. Ipconfig -a (clish)
C. Show interface (clish)
D. Ifconfig -a (clish)
E. Show interface (iclid)
Answer: D, E

Nokia examen   NO0-002   NO0-002 examen   certification NO0-002

NO.5 You want to live messages in the log file. What command would you use via clish
(Choose one):
A. Vi -e /var/log/messages
B. Tail -200 /var/db/messages
C. Tail - t /var/log/messages |more
D. Fw log -nft
E. Tail -f /var/log/messages
Answer: E

certification Nokia   NO0-002   certification NO0-002   NO0-002
Tail -f views messages in real-time. Fw log views the Firewall connection logs in
real-time

NO.6 The correct switch for single user mode from Boot manager on an IP440 is:
A. -s
B. Boot-p
C. b-f
D. -singlemode
Answer: A

certification Nokia   certification NO0-002   NO0-002   NO0-002

NO.7 What command will allow you to view the current connections table (Choose two):
A. fw tab -t connections -s
B. fwconn -i
C. fwtable -i
D. cpconntab -t
Answer: A, C

Nokia examen   NO0-002   certification NO0-002

NO.8 At what value must the TTL for a VRRP packet be set to:
A. 250
B. 255
C. 10
D. 100
Answer: B

Nokia examen   NO0-002   NO0-002

NO.9 Misuse is accepted as non-attack activity from inside the company itself:
A. False
B. True
Answer: B

Nokia examen   certification NO0-002   certification NO0-002   NO0-002 examen

NO.10 What are invalid commands in the boot manager (Choose one):
A. Boot
B. Set-defaults
C. Ls
D. setRAID
E. setenv
Answer: D

Nokia examen   NO0-002   NO0-002

NO.11 To what location/directory does Voyager make changes
(Choose one):
A. /config/db
B. /conf/
C. /var/conf
D. /var/admin
Answer: A

Nokia   NO0-002   certification NO0-002   NO0-002 examen   NO0-002   certification NO0-002

NO.12 What are the correct duplex settings. Which gives the more complete answer.
A. Console - Half Duplex and Full Duplex for a Serial connection
B. Cat6 Always full duplex
C. Serial always full duplex
D. Full Duplex - Switch and Half Duplex - Hub
Answer: D

certification Nokia   NO0-002   NO0-002
The most correct answer in this case would be Full Duplex for a switch, Half Duplex for
a hub

NO.13 You can no longer gain access to your Nokia firewall via secure
communications. What command will give you access and reset http:
A. Voyager -e 0 80
B. Set voyager ssl-level 0
C. Apachd -0 httpd.conf
D. Set Httpd -r -s
Answer: A, B

Nokia   certification NO0-002   NO0-002   NO0-002   NO0-002   certification NO0-002

NO.14 What ICLID command will show the version of the OS:
A. Show running config
B. Copy run start
C. Show version
D. Fw Ver
Answer: C

Nokia   NO0-002   NO0-002 examen   certification NO0-002   NO0-002

NO.15 What is not true of DNS on IPSO with Checkpoint NG (Choose one):
A. Checkpoint needs this in case of domain usage in policy
B. Reduces the number of hostname file assignments (less IP's required to be entered
manually)
C. Requires least one host entry of the machine itself, for Checkpoint
D. DNS must be enabled at startup for the NAP to function correctly
Answer: D

certification Nokia   NO0-002 examen   NO0-002 examen   NO0-002   NO0-002   NO0-002 examen

NO.16 What is the location of the hosts file on IPSO (Choose one):
A. /var
B. /var/config
C. /etc/hosts
Answer: C

certification Nokia   NO0-002 examen   certification NO0-002   certification NO0-002

NO.17 User UID of 0 will give:
A. Admin permissions of root on the machine
B. Backup user permissions on the enforcement module
C. Monitor user permissions
Answer: A

certification Nokia   certification NO0-002   NO0-002   certification NO0-002
Setting the UID of 0 from the Voyager or the CLI will give the same machine
permissions as the root user on a Nokia IPSO device

NO.18 What are the advantages of an external syslog server Vs data log files (Choose
three):
A. External backup of logs in case of malicious activity
B. Guaranteed delivery of logs
C. Multiple indexing and searching of logs
D. Ability to see more information and select what outputs including internal facility and
severity fields?
E. Allows a user to see Object ID
Answer: A,C,D

Nokia examen   NO0-002   NO0-002 examen   NO0-002   certification NO0-002
Incorrect answers:
B - There is no guarantee of delivery. The NAP could be down, or the syslog daemon
failed.
E - You will not see Object ID's. What you would be able to see is the remote device IP
and hostname.

NO.19 'What is correct of DNS and hostfiles on IPSO (Choose all that apply):
A. The hostfile is located in /etc/resolv.conf
B. Can use a hostfile if DNS is disabled
C. Checkpoint uses when retrieving policy with Checkpoint Policy Provider
D. A hostname must be an FQDN
E. Required for Checkpoint Licencing
Answer: A, B, D, E

Nokia   certification NO0-002   NO0-002   NO0-002   NO0-002 examen

NO.20 Commands to terminate an ICLID session are:
A. Close
B. Exit
C. Stop
D. Quit
Answer: B, D

certification Nokia   certification NO0-002   NO0-002 examen   NO0-002 examen   NO0-002

Le test Certification Nokia NO0-002 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Nokia NO0-002. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Nokia NO0-002.

Les meilleures Network Appliance NS0-163 examen pratique questions et réponses

Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification Network Appliance NS0-163, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test Network Appliance NS0-163 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Network Appliance NS0-163, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Network Appliance NS0-163 coûtant un peu d'argent.

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Network Appliance NS0-163, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Network Appliance NS0-163 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Network Appliance NS0-163 sans aucune doute.

Code d'Examen: NS0-163
Nom d'Examen: Network Appliance (Network Appliance Data Protection Solutions)
Questions et réponses: 154 Q&As

Pass4Test peut offrir la facilité aux candidats qui préparent le test Network Appliance NS0-163. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Network Appliance NS0-163 selon le résumé de test réel Network Appliance NS0-163. Vous pouvez réussir le test à la première fois sans aucune doute.

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

Choisir le Pass4Test vous permet non seulement à réussir le test Network Appliance NS0-163, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A Network Appliance NS0-163 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Network Appliance NS0-163. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

NS0-163 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-163.html

NO.1 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D

Network Appliance   NS0-163 examen   certification NS0-163   NS0-163 examen   NS0-163

NO.2 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A

certification Network Appliance   NS0-163   certification NS0-163

NO.3 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C

Network Appliance   NS0-163   NS0-163 examen

NO.4 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B

Network Appliance   certification NS0-163   NS0-163   certification NS0-163   NS0-163

NO.5 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C

Network Appliance   NS0-163   NS0-163   NS0-163   certification NS0-163

NO.6 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D

Network Appliance examen   NS0-163   NS0-163   NS0-163

NO.7 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance   NS0-163 examen   NS0-163

NO.8 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D

Network Appliance   NS0-163   NS0-163 examen

NO.9 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B

Network Appliance   NS0-163   NS0-163   certification NS0-163

NO.10 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B

certification Network Appliance   certification NS0-163   NS0-163

NO.11 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D

Network Appliance   NS0-163   certification NS0-163   certification NS0-163   NS0-163 examen

NO.12 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD

Network Appliance   NS0-163   NS0-163

NO.13 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D

certification Network Appliance   NS0-163 examen   NS0-163   NS0-163   NS0-163 examen

NO.14 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A

Network Appliance   NS0-163 examen   certification NS0-163   NS0-163   NS0-163 examen

NO.15 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D

certification Network Appliance   NS0-163 examen   NS0-163 examen

NO.16 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B

Network Appliance   NS0-163   certification NS0-163   NS0-163 examen

NO.17 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B

Network Appliance   NS0-163   certification NS0-163   NS0-163   NS0-163   NS0-163

NO.18 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B

Network Appliance   NS0-163   NS0-163 examen   certification NS0-163

NO.19 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C

certification Network Appliance   NS0-163 examen   NS0-163 examen   NS0-163

NO.20 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A

Network Appliance examen   certification NS0-163   NS0-163   NS0-163

L'équipe de Pass4Test rehcerche la Q&A de test certification Network Appliance NS0-163 en visant le test Network Appliance NS0-163. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Network Appliance NS0-163 sans aucune doute.

Meilleur Microsoft 70-290 test formation guide

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Microsoft 70-290 comme votre guide d'étude.

Est-que vous s'inquiétez encore à passer le test Certification 70-290 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Microsoft 70-290? Si vous voulez réussir le test Microsoft 70-290 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

Code d'Examen: 70-290
Nom d'Examen: Microsoft (Managing and Maintaining a Microsoft Windows Server 2003 Environment)
Questions et réponses: 268 Q&As

Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Microsoft 70-290 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.

70-290 Démo gratuit à télécharger: http://www.pass4test.fr/70-290.html

NO.1 You have a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You perform
a normal backup of Server1 every Saturday. You need to implement a backup strategy for Server1 to
meet the following requirements:
Minimize the time required to back up files.
On weekdays, back up files that have changed since the last backup. Which type of backup should you
perform on weekdays?
A. copy
B. daily
C. differential
D. incremental
Answer: D

Microsoft   70-290 examen   70-290 examen   70-290   70-290 examen   70-290

NO.2 You are the network administrator for your company. The network consists of a single Active Directory
domain. All network servers run Windows Server 2003, and all client computers run Windows XP
Professional.
A user named Peter uses a client computer named Client1. This computer has a locally attached tape
device.
You grant Peter the necessary permissions to perform backups of a member server named Server1.
Peter runs the Backup utility on Client1 to back up the files located on Server1. You need use your client
computer to view the most recent backup logs for Server1. What should you do?
A. Use Notepad to view the contents of the backup report located on Server1.
B. Use Notepad to view the contents of the backup report located on Client1.
C. Use Event Viewer to view the contents of the application log located on Server1.
D. Use Event Viewer to view the contents of the application log located on Client1.
Answer: B

Microsoft   certification 70-290   70-290 examen

NO.3 You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).
You use Windows Backup to back up Server1.
You need to view all the backup jobs that are scheduled to run on Server1. What should you do?
A. From Administrative Tools, run Services.
B. From Administrative Tools, run File Server Manager.
C. From Windows System Tools, run Scheduled Tasks.
D. From Windows System Tools, run System Information.
Answer: C

Microsoft   70-290 examen   70-290   70-290   70-290   70-290

NO.4 You are the network administrator for your company. All network servers run Windows Server 2003.
The network includes a file server named File1. File1 contains a single disk for system files and two SCSI
hard disks that comprise a 72 GB mirrored volume with 65 GB of read only data. Users connect to this
data by using shortcuts on their desktops. File1 is scheduled for replacement. You have a scheduled
maintenance window to complete
this task. Before the maintenance window, you build a new server. You need to bring the new server
online with current data and re establish redundancy as quickly as possible. You must also ensure that the
desktop shortcuts will continue to function.
What should you do?
A. name the new server File2. Create a new mirrored volume by using two 72 GB disks.
Connect File2 to the network and copy the data from File1. When copying is complete, shut down the old
File1.
B. name the new server File1. Move both disks from the old File1 to the new File1. Scan the disks for
changes. Import the disks. Connect the new File1 to the network.
C. name the new server File1. Break the mirror on the old File1. Move one of the disks from the old File1
to the new File1. Scan the disk for changes. Initialize the disk. Select the spare disk and create the mirror.
Connect the new File1 to the network.
D. name the new server File1. Remove one of the disks in the mirror from the old File1. Move the disk to
the new File1. Scan the disk for changes. Import the disk. Shut down the old File1 and connect the new
File1 to the network.
Answer: B

Microsoft   70-290   70-290

NO.5 You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You need
to use Windows Backup to meet the following requirements:
Minimize the number of scheduled backup jobs.
Perform a scheduled normal backup to disk every Friday. Perform a scheduled normal backup to tape
every Friday.
Perform scheduled differential backups to tape every Monday, Tuesday, Wednesday, and Thursday. How
many scheduled jobs should you create from Windows Backup?
A. one
B. two
C. three
D. six
Answer: C

Microsoft   70-290 examen   certification 70-290   70-290   certification 70-290

NO.6 You are the network administrator for your company. Your network consists of a single Active Directory
domain. All network servers run Windows Server 2003. You successfully install a new server named
Server9. Immediately afterward, you perform the first backup of the server. The date is January 25, 2003.
Next, you add a user named Anne to the local Backup Operators group. You direct Anne to perform
nightly backups of Server9.
One week later, you try to review the backup logs for Server9. The Backup utility displays the information
shown in the exhibit. (Click the Exhibit button.)
You verify that Anne is performing nightly backups. You need to be able to review the backup logs for the
previous week. What should you do?
A. Add your user account to the local Backup Operators group.
B. Direct Anne to use her user account to log on and open the Backup utility.
C. In the Backup utility, select the Verify data after the backup completes check box.
D. Open %windir%\system32\LogFiles. Create a new subfolder named BackupLogs.
Answer: B

Microsoft   70-290   certification 70-290

NO.7 You are the network administrator for your company. All network servers run Windows Server 2003.
A member server named Server1 is configured to run shadow copies without a storage limit. Server1 has
the disk configuration shown in the following table.
You need to create additional free space on DATA1. You also need to improve the performance of
Server1and ensure that it has sufficient space for shadow copies in the future. Which two actions should
you perform? (Each correct answer presents part of the solution.Choose two.)
A. Delete the shadow copies on DATA1.
B. Delete Backup.bkf on DATA3.
C. In the properties of DATA1, relocate the shadow copies to DATA2.
D. In the properties of DATA1, relocate the shadow copies to DATA3.
E. Delete DATA3 and extend the DATA1 partition to include the space on DATA3.
Answer: AD

Microsoft   70-290   certification 70-290   70-290   70-290

NO.8 You are a network administrator for your company. All servers run Windows Server 2003. You manage a
server that functions as a file server. The data volume on the server is mirrored. Each physical disk is on a
separate controller. One of the hard disks that contains the data volume fails. You discover that the failure
was caused by a faulty SCSI controller. You replace the SCSI controller.
You need to restore the data volume to its previous state. You need to achieve this goal by using the
minimum amount of administrative effort.
What should you do?
A. Run the diskpart active command to activate the failed volume.
B. Convert both disks to basic disks, and then restore the data.
C. Break the mirror, and then re create the mirror.
D. Select a disk in the mirror, and then reactivate the volume.
Answer: D

Microsoft examen   70-290   70-290   70-290

NO.9 You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You need to ensure that a
defragmentation of the server's hard disk drive runs each night.
What should you do?
A. Create a scheduled task that runs Dfrg.msc.
B. Create a scheduled task that runs Defrag.exe.
C. From Computer Management, run Disk Management.
D. From Computer Management, run Disk Defragmenter.
Answer: B

Microsoft   70-290 examen   certification 70-290   certification 70-290

NO.10 You have a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You perform
a normal backup of Server1 every Saturday. You need to implement a backup strategy for Server1 to
meet the following requirements:
Minimize the time required to restore files.
On weekdays, back up only files that have changed since the Saturday backup. Which type of backup
should you perform on weekdays?
A. copy
B. daily
C. differential
D. incremental
Answer: C

Microsoft examen   70-290 examen   70-290

NO.11 You are a network administrator for your company. The network consists of a single Active Directory
domain.
A user named Mary works in the information technology (IT) security department. Mary is a member of the
IT Security global group. Mary reports that no one in the ITSecurity global group can access the security
log from the console of a computer named Server1. You need to grant the ITSecurity global group the
minimum rights necessary to view the security log on Server1.
How should you modify the local security policy?
A. Assign the Generate security audits user right to the ITSecurity global group.
B. Assign the Manage auditing and security logs user right to the ITSecurity global group.
C. Assign the Allow logon through Terminal Services user right to the ITSecurity global group.
D. Assign the Act as part of the operating system user right to the ITSecurity global group.
Answer: B

Microsoft   70-290   70-290   certification 70-290   70-290 examen

NO.12 You are the domain administrator for your company's Active Directory domain. All client computers run
Windows 2000 Professional.
You recently deployed 10 new servers that run Windows Server 2003. You placed the servers in a new
organizational unit (OU) named W2K3Servers.
Anne is another network administrator.
You need to configure the appropriate permissions to allow Anne to manage the new servers by using
Terminal Services from her client computer. You need to assign Anne only the permissions she needs to
perform her job.
What should you do?
A. Add Anne's user account to the local Power Users group on each server that runs Windows Server
2003.
B. Add Anne's user account to the Remote Desktop Users group on each server that runs Windows
Server 2003.
C. Assign Anne's user account the Allow Read and the Allow Write permissions for the W2K3Servers OU.
D. Configure the Managed By property for the W2K3Servers OU to Anne's user account.
Answer: B

Microsoft   70-290 examen   70-290   70-290

NO.13 You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You need
to implement a backup schedule on Server1 to meet the following requirements:
Everyday, back up all files and folders to disk.
Every Friday, back up all files and folders to tape. Every Sunday, Tuesday, and Thursday, back up only the
files and folders that have changed since the previous Friday's backup to tape.
Which backup jobs should you create?
A. a normal backup to disk everyday
a normal backup to tape on Friday
a differential backup to tape on Sunday, Tuesday, and Thursday
B. a normal backup to disk everyday a normal backup to tape on Friday an incremental backup to tape on
Sunday, Tuesday, and Thursday
C. a copy backup to disk everyday
a normal backup to tape on Friday
a differential backup to tape on Sunday, Tuesday and, Thursday
D. a copy backup to disk everyday a normal backup to tape on Friday an incremental backup to tape on
Sunday, Tuesday and, Thursday
Answer: C

certification Microsoft   70-290 examen   70-290   70-290   70-290 examen

NO.14 Your organization includes two servers named Server1 and Server2 that run Windows Server 2003
Service Pack 2 (SP2).
Server1 and Server2 host the same Web sites.
You need to back up the server configuration on Server1 every hour and then apply the configuration to
Server2.
Which command should you use?
A. IISBack.vbs /backup
B. IISBack.vbs /list
C. IISCnfg.vbs /copy
D. IISCnfg.vbs /save
Answer: C

Microsoft   certification 70-290   certification 70-290   70-290 examen

NO.15 You are the network administrator for your company. The network consists of a single Active Directory
domain. All network servers run Windows Server 2003, and all are members of the domain. All client
computers run Windows XP Professional. Five Web servers host the content for the internal network.
Each one runs IIS and has Remote Desktop connections enabled. Web developers are frequently
required to update content on the Web servers.
You need to ensure that the Web developers can use Remote Desktop Connection to transfer Web
documents from their client computers to the five Web servers.
What should you do?
A. Install the Terminal Server option on all five Web servers. Use Terminal Services Configuration
Manager to modify the session directory setting.
B. Install the Terminal Server option on all five Web servers. Use Terminal Services Configuration
Manager to create a new Microsoft RDP 5.2 connection.
C. On each Web developer's client computer, select the Disk Drives check box in the properties of
Remote Desktop Connection.
D. On each Web developer's client computer, select the Allow users to connect remotely to this computer
check box in the System Properties dialog box.
Answer: C

Microsoft   certification 70-290   70-290

NO.16 You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server is configured as
shown in the following table.
You need to create a software mirror of Disk1. What should you do first?
A. Convert Disk3 to a dynamic disk.
B. Create a new NTFS volume on Disk3.
C. Run the Extend Volume Wizard on Disk1.
D. Convert Disk3 to a GUID Partition Table (GPT) disk.
Answer: A

Microsoft   certification 70-290   70-290   certification 70-290

NO.17 You are the network administrator for your company. The network originally consists of a single
Windows NT 4.0 domain.
You upgrade the domain to a single Active Directory domain. All network servers now run Windows
Server 2003, and all client computers run Windows XP Professional. Your staff provides technical support
to the network. They frequently establish Remote Desktop connections with a domain controller named
DC1. You hire 25 new support specialists for your staff. You use Csvde.exe to create Active Directory user
accounts for all 25.
A new support specialist named Paul reports that he cannot establish a Remote Desktop connection with
DC1. He receives the message shown in the Logon Message exhibit. (Click the Exhibit button.)
You open Gpedit.msc on DC1. You see the display shown in the Security Policy exhibit. (Click the Exhibit
button.)
You need to ensure that Paul can establish Remote Desktop connections with DC1. What should you do?
A. Direct Paul to establish a VPN connection with DC1 before he starts Remote Desktop Connection.
B. Direct Paul to set a password for his user account before he starts Remote Desktop Connection.
C. In the local security policy of DC1, disable the Require strong (Windows 2000 or later) session key
setting.
D. In the local security policy of DC1, enable the Disable machine account password changes setting.
Answer: B

certification Microsoft   certification 70-290   70-290 examen

NO.18 You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server has a backup
tape drive installed.
You need to schedule a backup to tape. The tape must be ejected when the backup job is complete.
Which commands should you include in the scheduled task?
A. Devcon.exe and Poolmon.exe
B. Ntbackup.exe and Devcon.exe
C. Ntbackup.exe and Rsm.exe
D. Rsm.exe and Poolmon.exe
Answer: C

Microsoft   70-290 examen   70-290

NO.19 You are the network administrator for your company. The network consists of a single Active Directory
domain. All network servers run Windows Server 2003. You install the Remote Administration tools on a
server named Server1, selecting all default settings.
In Internet Explorer, you type https://server1/admin. You receive the following error message:
"HTTP Error 404 File or directory not found."
You open IIS Manager and see the configuration shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can use Internet Explorer to administer Server1. What should you do?
A. In Internet Explorer, type http://server1:8099.
B. In Internet Explorer, type http://server1.
C. Install the Remote Desktop Web Connection subcomponent of the World Wide Web services.
D. In Internet Explorer, type https://server1:8098.
E. In Internet Explorer, type https://server1.
Answer: E

certification Microsoft   70-290 examen   certification 70-290

NO.20 You are the network administrator for your company. All network servers run Windows Server 2003.
One of your servers contains a RAID 5 volume. Routine monitoring reveals a failed disk in the set. The
server is running and users are connecting to shared folders on the RAID 5 volume. You shut down the
server and replace the failed disk. Now you need to ensure that the RAID 5 volume is redundant. What
should you do?
A. Initialize the new disk. Select the failed region and then select the Repair Volume option.
B. Import the foreign disk. Select the failed region and then select the Repair Volume option.
C. Initialize the new disk. Select the failed region and then select the Reactivate Disk option.
D. Import the foreign disk. Select the failed region and then select the Reactivate Disk option.
Answer: A

Microsoft   70-290 examen   certification 70-290   70-290   70-290 examen

La Q&A Microsoft 70-290 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Microsoft 70-290.

Microsoft 70-640, de formation et d'essai

Il y a nombreux façons à vous aider à réussir le test Microsoft 70-640. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test Microsoft 70-640 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test Microsoft 70-640 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Microsoft 70-640 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Microsoft 70-640 est le rêve pour les professionnels ambitieux.

On peut voir que beaucoup de candidats ratent le test Microsoft 70-640 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Microsoft 70-640 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Microsoft 70-640, Pass4Test peut offrir les Q&As des autres test Certification IT.

Après une longue attente, les documentations de test Microsoft 70-640 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Microsoft 70-640 à la première fois.

Code d'Examen: 70-640
Nom d'Examen: Microsoft (Windows Server 2008 Active Directory. Configuring)
Questions et réponses: 490 Q&As

L'équipe de Pass4Test rehcerche la Q&A de test certification Microsoft 70-640 en visant le test Microsoft 70-640. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Microsoft 70-640 sans aucune doute.

Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft 70-640 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft 70-640.

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

70-640 Démo gratuit à télécharger: http://www.pass4test.fr/70-640.html

NO.1 Your company has file servers located in an organizational unit named Payroll. The file servers contain
payroll files located in a folder named Payroll. You create a GPO. You need to track which employees
access the Payroll files on the file servers. What should you do?
A. Enable the Audit process tracking option. Link the GPO to the Domain Controllers organizational unit.
On the file servers, configure Auditing for the Authenticated Users group in the Payroll folder.
B. Enable the Audit object access option. Link the GPO to the Payroll organizational unit. On the file
servers, configure Auditing for the Everyone group in the Payroll folder.
C. Enable the Audit process tracking option. Link the GPO to the Payroll organizational unit. On the file
servers, configure Auditing for the Everyone group in the Payroll folder.
D. Enable the Audit object access option. Link the GPO to the domain. On the domain controllers,
configure Auditing for the Authenticated Users group in the Payroll folder.
Answer: B

Microsoft   certification 70-640   70-640   70-640 examen

NO.2 Your company uses a Windows 2008 Enterprise certificate authority (CA) to issue certificates. You
need to implement key archival. What should you do?
A. Configure the certificate for automatic enrollment for the computers that store encrypted files.
B. Install an Enterprise Subordinate CA and issue a user certificate to users of the encrypted files.
C. Apply the Hisecdc security template to the domain controllers.
D. Archive the private key on the server.
Answer: D

Microsoft examen   certification 70-640   certification 70-640   70-640

NO.3 Your company has an Active Directory domain. The company has two domain controllers named DC1
and DC2. DC1 holds the Schema Master role.
DC1 fails. You log on to Active Directory by using the administrator account. You are not able to transfer
the Schema Master operations role.
You need to ensure that DC2 holds the Schema Master role.
What should you do?
A. Configure DC2 as a bridgehead server.
B. On DC2, seize the Schema Master role.
C. Log off and log on again to Active Directory by using an account that is a member of the Schema
Administrators group. Start the Active Directory Schema snap-in.
D. Register the Schmmgmt.dll. Start the Active Directory Schema snap-in.
Answer: B

certification Microsoft   certification 70-640   70-640   70-640

NO.4 Your company has an Active Directory forest that contains a single domain. The domain member
server has an Active Directory Federation Services (AD FS) role installed. You need to configure AD FS to
ensure that AD FS tokens contain information from the Active Directory domain. What should you do?
A. Add and configure a new account partner.
B. Add and configure a new resource partner.
C. Add and configure a new account store.
D. Add and configure a Claims-aware application.
Answer: C

Microsoft   certification 70-640   70-640   70-640   70-640   70-640

NO.5 Your network consists of an Active Directory forest that contains one domain named contoso.com. All
domain controllers run Windows Server 2008 R2 and are configured as DNS servers. You have two
Active Directory-integrated zones: contoso.com and nwtraders.com. You need to ensure a user is able to
modify records in the contoso.com zone. You must prevent the user from modifying the SOA record in the
nwtraders.com zone. What should you do?
A. From the Active Directory Users and Computers console, run the Delegation of Control Wizard.
B. From the Active Directory Users and Computers console, modify the permissions of the Domain
Controllers organizational unit (OU).
C. From the DNS Manager console, modify the permissions of the contoso.com zone.
D. From the DNS Manager console, modify the permissions of the nwtraders.com zone.
Answer: C

Microsoft examen   70-640   70-640   70-640

NO.6 Your company, Contoso Ltd has a main office and a branch office. The offices are connected by a WAN
link. Contoso has an Active Directory forest that contains a single domain named ad.contoso.com.
The ad.contoso.com domain contains one domain controller named DC1 that is located in the main office.
DC1 is configured as a DNS server for the ad.contoso.com DNS zone. This zone is configured as a
standard primary zone.
You install a new domain controller named DC2 in the branch office. You install DNS on DC2.
You need to ensure that the DNS service can update records and resolve DNS queries in the event that a
WAN link fails.
What should you do?
A. Create a new stub zone named ad.contoso.com on DC2.
B. Create a new standard secondary zone named ad.contoso.com on DC2.
C. Configure the DNS server on DC2 to forward requests to DC1.
D. Convert the ad.contoso.com zone on DC1 to an Active Directory-integrated zone.
Answer: D

certification Microsoft   certification 70-640   70-640 examen   70-640 examen

NO.7 Your company has an Active Directory domain. All servers run Windows Server 2008 R2. Your company
uses an Enterprise Root certificate authority (CA). You need to ensure that revoked certificate information
is highly available. What should you do?
A. Implement an Online Certificate Status Protocol (OCSP) responder by using an Internet Security and
Acceleration Server array.
B. Publish the trusted certificate authorities list to the domain by using a Group Policy Object (GPO).
C. Implement an Online Certificate Status Protocol (OCSP) responder by using Network Load Balancing.
D. Create a new Group Policy Object (GPO) that allows users to trust peer certificates. Link the GPO to
the domain.
Answer: C

Microsoft   70-640   70-640   70-640

NO.8 Your network consists of a single Active Directory domain. All domain controllers run Windows Server
2008 R2 and are configured as DNS servers. A domain controller named DC1 has a standard primary
zone for contoso.com. A domain controller named DC2 has a standard secondary zone for contoso.com.
You need to ensure that the replication of the contoso.com zone is encrypted. You must not lose any zone
data. What should you do?
A. Convert the primary zone into an Active Directory-integrated stub zone. Delete the secondary zone.
B. Convert the primary zone into an Active Directory-integrated zone. Delete the secondary zone.
C. Configure the zone transfer settings of the standard primary zone. Modify the Master Servers lists on
the secondary zone.
D. On both servers, modify the interface that the DNS server listens on.
Answer: B

Microsoft   certification 70-640   certification 70-640   70-640   certification 70-640

NO.9 Your company has an Active Directory domain. A user attempts to log on to a computer that was turned
off for twelve weeks. The administrator receives an error message that authentication has failed. You
need to ensure that the user is able to log on to the computer. What should you do?
A. Run the netsh command with the set and machine options.
B. Reset the computer account. Disjoin the computer from the domain, and then rejoin the computer to
the domain.
C. Run the netdom TRUST /reset command.
D. Run the Active Directory Users and Computers console to disable, and then enable the computer
account.
Answer: B

Microsoft   70-640 examen   70-640   70-640 examen   70-640 examen

NO.10 You network consists of a single Active Directory domain. All domain controllers run Windows Server
2008 R2. You need to reset the Directory Services Restore Mode (DSRM) password on a domain
controller.
What tool should you use?
A. Active Directory Users and Computers snap-in
B. ntdsutil
C. Local Users and Groups snap-in
D. dsmod
Answer: B

certification Microsoft   70-640   70-640

NO.11 An Active Directory database is installed on the C volume of a domain controller. You need to move the
Active Directory database to a new volume. What should you do?
A. Copy the ntds.dit file to the new volume by using the ROBOCOPY command.
B. Move the ntds.dit file to the new volume by using Windows Explorer.
C. Move the ntds.dit file to the new volume by running the Move-item command in Microsoft Windows
PowerShell.
D. Move the ntds.dit file to the new volume by using the Files option in the Ntdsutil utility.
Answer: D

Microsoft   70-640 examen   70-640   70-640 examen

NO.12 Your company has a main office and a branch office. You deploy a read-only domain controller (RODC)
that runs Microsoft Windows Server 2008 to the branch office. You need to ensure that users at the
branch office are able to log on to the domain by using the RODC. What should you do?
A. Add another RODC to the branch office.
B. Configure a new bridgehead server in the main office.
C. Decrease the replication interval for all connection objects by using the Active Directory Sites and
Services console.
D. Configure the Password Replication Policy on the RODC. Answer: D

Microsoft   70-640   certification 70-640

NO.13 Your company has a server that runs an instance of Active Directory Lightweight Directory Service (AD
LDS). You need to create new organizational units in the AD LDS application directory partition. What
should you do?
A. Use the dsmod OU <OrganizationalUnitDN> command to create the organizational units.
B. Use the Active Directory Users and Computers snap-in to create the organizational units on the AD
LDS application directory partition.
C. Use the dsadd OU <OrganizationalUnitDN> command to create the organizational units.
D. Use the ADSI Edit snap-in to create the organizational units on the AD LDS application directory
partition.
Answer: D

certification Microsoft   70-640 examen   certification 70-640   certification 70-640   70-640 examen

NO.14 Your company has an Active Directory forest that runs at the functional level of Windows Server 2008.
You implement Active Directory Rights Management Services (AD RMS).
You install Microsoft SQL Server 2005. When you attempt to open the AD RMS administration Web site,
you receive the following error message: "SQL Server does not exist or access denied."
You need to open the AD RMS administration Web site.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A. Restart IIS.
B. Manually delete the Service Connection Point in AD DS and restart AD RMS.
C. Install Message Queuing.
D. Start the MSSQLSVC service.
Answer: AD

Microsoft examen   70-640 examen   70-640

NO.15 You are decommissioning domain controllers that hold all forest-wide operations master roles. You
need to transfer all forest-wide operations master roles to another domain controller. Which two roles
should you transfer? (Each correct answer presents part of the solution. Choose two.)
A. Domain naming master
B. Infrastructure master
C. RID master
D. PDC emulator
E. Schema master
Answer: AE

Microsoft examen   70-640   70-640   70-640

NO.16 You have a single Active Directory domain. All domain controllers run Windows Server 2008 and are
configured as DNS servers. The domain contains one Active Directory-integrated DNS zone. You need to
ensure that outdated DNS records are automatically removed from the DNS zone.
What should you do?
A. From the properties of the zone, modify the TTL of the SOA record.
B. From the properties of the zone, enable scavenging.
C. From the command prompt, run ipconfig /flushdns.
D. From the properties of the zone, disable dynamic updates.
Answer: B

certification Microsoft   70-640 examen   70-640   70-640   70-640 examen

NO.17 Contoso, Ltd. has an Active Directory domain named ad.contoso.com. Fabrikam, Inc. has an Active
Directory domain named intranet.fabrikam.com. Fabrikam's security policy prohibits the transfer of
internal DNS zone data outside the Fabrikam network. You need to ensure that the Contoso users are
able to resolve names from the intranet.fabrikam.com domain.
What should you do?
A. Create a new stub zone for the intranet.fabrikam.com domain.
B. Configure conditional forwarding for the intranet.fabrikam.com domain.
C. Create a standard secondary zone for the intranet.fabrikam.com domain.
D. Create an Active DirectoryCintegrated zone for the intranet.fabrikam.com domain.
Answer: B

Microsoft examen   70-640   70-640

NO.18 Your network consists of a single Active Directory domain. All domain controllers run Windows Server
2008 R2. The Audit account management policy setting and Audit directory services access setting are
enabled for the entire domain. You need to ensure that changes made to Active Directory objects can be
logged. The logged changes must include the old and new values of any attributes.
What should you do.?
A. Run auditpol.exe and then configure the Security settings of the Domain Controllers OU.
B. From the Default Domain Controllers policy, enable the Audit directory service access setting and
enable directory service changes.
C. Enable the Audit account management policy in the Default Domain Controller Policy.
D. Run auditpol.exe and then enable the Audit directory service access setting in the Default Domain
policy.
Answer: B

Microsoft   70-640 examen   70-640 examen   70-640   certification 70-640   70-640

NO.19 Your company has a single Active Directory domain named intranet.adatum.com. The domain
controllers run Windows Server 2008 and the DNS server role. All computers, including non-domain
members, dynamically register their DNS records. You need to configure the intranet.adatum.com zone to
allow only domain members to dynamically register DNS records.
What should you do?
A. Set dynamic updates to Secure Only.
B. Remove the Authenticated Users group.
C. Enable zone transfers to Name Servers.
D. Deny the Everyone group the Create All Child Objects permission.
Answer: A

Microsoft examen   70-640   certification 70-640   70-640

NO.20 You have two servers named Server1 and Server2. Both servers run Windows Server 2008 R2. Server1
is configured as an enterprise root certification authority (CA). You install the Online Responder role
service on Server2. You need to configure Server1 to support the Online Responder. What should you
do?
A. Import the enterprise root CA certificate.
B. Configure the Certificate Revocation List Distribution Point extension.
C. Configure the Authority Information Access (AIA) extension.
D. Add the Server2 computer account to the CertPublishers group.
Answer: C

Microsoft   certification 70-640   70-640 examen   70-640   70-640

Si vous faites toujours la lutte contre le test Microsoft 70-640, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Microsoft 70-640. Si vous avez déjà décidé à s'améliorer via Microsoft 70-640, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.