Certification BEA de téléchargement gratuit pratique d'examen 0B0-109 0B0-108, questions et réponses

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Le Certificat de BEA 0B0-108 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat BEA 0B0-108, c'est-à-dire avoir une grande fortune. Le Certificat BEA 0B0-108 peut bien tester des connaissances professionnelles IT. La Q&A BEA 0B0-108 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

Code d'Examen: 0B0-109
Nom d'Examen: BEA (WebLogic Server 9)
Questions et réponses: 120 Q&As

Code d'Examen: 0B0-108
Nom d'Examen: BEA (System Administration Exam)
Questions et réponses: 70 Q&As

Il y a nombreux façons à vous aider à réussir le test BEA 0B0-108. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test BEA 0B0-108 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test BEA 0B0-108 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test BEA 0B0-109. Votre argent sera tout rendu si vous échouez le test.

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A BEA 0B0-109 dans Pass4Test pour se former avant le test BEA 0B0-109.

0B0-108 Démo gratuit à télécharger: http://www.pass4test.fr/0B0-108.html

NO.1 When configuring JMS Modules using the WebLogic Administration Console or WLST, the module
information will be stored in:
A. <modulename> stanza in the weblogic-application.xml file.
B. <modulename> stanza in the config\config.xml file.
C. <domain>/config/jms/<modulename>-jms.xml file
D. <domain>/servers/<servername>/targets/jms/<modulename>_<servername>.xml
Answer: C

certification BEA   certification 0B0-108   certification 0B0-108   certification 0B0-108

NO.2 WebLogic store-and-forward service is used for:
A. Storing and forwarding the configuration reliably to all the Managed Servers in a cluster
B. Storing log messages and forwarding them to the administration server for creating the Domain Log
C. Storing and delivering JMS messages reliably between applications across WebLogic Server 9.x
instances
D. Storing and forwarding EJB requests reliably to a back-end EJB cluster
Answer: C

BEA examen   0B0-108 examen   0B0-108 examen   certification 0B0-108   0B0-108 examen

NO.3 The default location for storing JMS persistent messages in WebLogic Server 9.x is:
A. Database Store using JDBC
B. WebLogic Persistent Store using a file
C. LDAP server using the embedded LDAP server
D. Remote server using t3 socket buffering
Answer: B

certification BEA   0B0-108 examen   certification 0B0-108

NO.4 What are the four basic components of a JMS system-resource module in the config.xml in WebLogic
9.x?
A. Name, target, subdeployment, descriptor-file-name
B. Domain, jms-server, connection factory, destination
C. Config.xml, jms-module, subdeployment, descriptor-file-name
D. Name, jms-module, subdeployment, descriptor-file-name
Answer: A

BEA   certification 0B0-108   certification 0B0-108   0B0-108 examen

NO.5 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
In the future, each department will have its own schema within the Oracle database and the developers
are writing their code with this in mind. However, for now, it has been decided to store all data in a single,
company-wide schema. Which of the following approaches will make a future move to multiple schema
simple, while making the most efficient use of resources today?
A. Deploy an application-scoped Data Source module with each application.
B. Deploy a Data Source system module and assign it multiple JNDI names.
C. Deploy each department's application to its own WebLogic server.
D. Deploy a Data Source system module for each department's application.
Answer: B

certification BEA   0B0-108   0B0-108   0B0-108 examen

NO.6 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
Before deploying it into the test environment, you review the configuration of the Sales department's
Enterprise Application, which is meant to contain a JDBC Application Module you are concerned that it
may not have been built correctly. Which of the following is not a requirement for JDBC modules?
A. It is contained in a file that ends in -jdbc.xml.
B. It includes an element that lists its targets.
C. It conforms to the weblogic-jdbc.xsd schema.
D. It includes a unique name element.
Answer: B

BEA   0B0-108 examen   0B0-108   certification 0B0-108   certification 0B0-108   0B0-108 examen

NO.7 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
The database team informs you that they have now implemented Oracle Real Application Clusters (RA for
the Customer Service database, and applications should connect to a second database node if the
primary node is unavailable. You set up a Multi Data Source in Failover mode, which is configured to
use two Data Sources PrimaryDS and SecondaryDS, each connecting to one Oracle RAC node.
WebLogic Server will fail over to SecondaryDS if a connection test to PrimaryDS fails. Under what other
condition will this happen by default (that is, with no additional options checke)?
A. If a connection to PrimaryDS is not released within Statement Timeout seconds.
B. If all the connections to PrimaryDS are in use.
C. If the administrator has suspended the PrimaryDS Data Source.
D. Failover will only occur if a connection test fails for a PrimaryDS connection.
Answer: C

certification BEA   certification 0B0-108   certification 0B0-108

NO.8 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
Before deploying it into the test environment, you review the configuration of the Sales department's
Enterprise Application, which is meant to contain a JDBC Application Module ?you are concerned that it
may not have been built correctly. Most of an application's deployment descriptors only reference the
JDBC module using a JNDI name. Which file listed below is the only one that refers directly to the JDBC
Application Module file?
A. config.xml
B. application.xml
C. weblogic-ejb-jar.xml
D. weblogic-application.xml
Answer: D

certification BEA   0B0-108 examen   0B0-108   0B0-108 examen

BEA 0B0-108 examen pratique questions et réponses

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A BEA 0B0-108. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test BEA 0B0-108 sans aucune doute.

Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test BEA 0B0-108. Cet outil de formation est convenable pour les candidats de test BEA 0B0-108. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test BEA 0B0-108, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test BEA 0B0-108 à la première fois.

Si vous voulez ne se soucier plus à passer le test BEA 0B0-108, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test BEA 0B0-108. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A BEA 0B0-108 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test BEA 0B0-108 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

Code d'Examen: 0B0-108
Nom d'Examen: BEA (System Administration Exam)
Questions et réponses: 70 Q&As

0B0-108 Démo gratuit à télécharger: http://www.pass4test.fr/0B0-108.html

NO.1 The default location for storing JMS persistent messages in WebLogic Server 9.x is:
A. Database Store using JDBC
B. WebLogic Persistent Store using a file
C. LDAP server using the embedded LDAP server
D. Remote server using t3 socket buffering
Answer: B

certification BEA   0B0-108 examen   0B0-108   0B0-108   0B0-108

NO.2 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
In the future, each department will have its own schema within the Oracle database and the developers
are writing their code with this in mind. However, for now, it has been decided to store all data in a single,
company-wide schema. Which of the following approaches will make a future move to multiple schema
simple, while making the most efficient use of resources today?
A. Deploy an application-scoped Data Source module with each application.
B. Deploy a Data Source system module and assign it multiple JNDI names.
C. Deploy each department's application to its own WebLogic server.
D. Deploy a Data Source system module for each department's application.
Answer: B

BEA   certification 0B0-108   0B0-108   certification 0B0-108   0B0-108

NO.3 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
When starting WebLogic Server, the Marketing database is unavailable. Which of these Data Source
configuration options will ensure that the Marketing application can access its database once it becomes
available again?
A. Test Connections On Reserve
B. Test Frequency
C. Connection Creation Retry Frequency
D. Login Delay
E. Profile Connection Reservation Wait
Answer: C

BEA   0B0-108 examen   0B0-108   0B0-108 examen

NO.4 WebLogic store-and-forward service is used for:
A. Storing and forwarding the configuration reliably to all the Managed Servers in a cluster
B. Storing log messages and forwarding them to the administration server for creating the Domain Log
C. Storing and delivering JMS messages reliably between applications across WebLogic Server 9.x
instances
D. Storing and forwarding EJB requests reliably to a back-end EJB cluster
Answer: C

BEA   certification 0B0-108   0B0-108 examen   0B0-108 examen   certification 0B0-108   0B0-108

NO.5 What are the four basic components of a JMS system-resource module in the config.xml in WebLogic
9.x?
A. Name, target, subdeployment, descriptor-file-name
B. Domain, jms-server, connection factory, destination
C. Config.xml, jms-module, subdeployment, descriptor-file-name
D. Name, jms-module, subdeployment, descriptor-file-name
Answer: A

certification BEA   certification 0B0-108   0B0-108   0B0-108   0B0-108

NO.6 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
Before deploying it into the test environment, you review the configuration of the Sales department's
Enterprise Application, which is meant to contain a JDBC Application Module you are concerned that it
may not have been built correctly. Which of the following is not a requirement for JDBC modules?
A. It is contained in a file that ends in -jdbc.xml.
B. It includes an element that lists its targets.
C. It conforms to the weblogic-jdbc.xsd schema.
D. It includes a unique name element.
Answer: B

BEA examen   0B0-108   certification 0B0-108   0B0-108 examen

NO.7 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
The database team informs you that they have now implemented Oracle Real Application Clusters (RA for
the Customer Service database, and applications should connect to a second database node if the
primary node is unavailable. You set up a Multi Data Source in Failover mode, which is configured to
use two Data Sources PrimaryDS and SecondaryDS, each connecting to one Oracle RAC node.
WebLogic Server will fail over to SecondaryDS if a connection test to PrimaryDS fails. Under what other
condition will this happen by default (that is, with no additional options checke)?
A. If a connection to PrimaryDS is not released within Statement Timeout seconds.
B. If all the connections to PrimaryDS are in use.
C. If the administrator has suspended the PrimaryDS Data Source.
D. Failover will only occur if a connection test fails for a PrimaryDS connection.
Answer: C

BEA examen   0B0-108   0B0-108   certification 0B0-108

NO.8 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
Before deploying it into the test environment, you review the configuration of the Sales department's
Enterprise Application, which is meant to contain a JDBC Application Module ?you are concerned that it
may not have been built correctly. Most of an application's deployment descriptors only reference the
JDBC module using a JNDI name. Which file listed below is the only one that refers directly to the JDBC
Application Module file?
A. config.xml
B. application.xml
C. weblogic-ejb-jar.xml
D. weblogic-application.xml
Answer: D

BEA   certification 0B0-108   0B0-108   0B0-108 examen

NO.9 When configuring JMS Modules using the WebLogic Administration Console or WLST, the module
information will be stored in:
A. <modulename> stanza in the weblogic-application.xml file.
B. <modulename> stanza in the config\config.xml file.
C. <domain>/config/jms/<modulename>-jms.xml file
D. <domain>/servers/<servername>/targets/jms/<modulename>_<servername>.xml
Answer: C

BEA examen   0B0-108 examen   0B0-108   0B0-108

NO.10 Scenario : The Stock Control Application you are going to deploy to a cluster of WebLogic Managed
Servers requires a JMS destination to asynchronously deliver the messages to the back-end
Warehousing Application. To distribute the messages across the cluster, you decided to configure the
distributed destination. Also the Warehousing Application is a legacy application written to implement a
proprietary MQ API connecting an MQ-Series server. The Stock Control Application is implemented as a
web application on a WebLogic cluster delivering the message to the distributed destination. The cluster
has three Managed Servers hosted on two high powered machines and one low range/powered machine.
To distribute the physical destinations unevenly across the clustered WebLogic Managed Servers so that
the high-powered machines can receive more messages than the low-powered machines, configure the
distributed destination with:
A. "Allocate Members Uniformly" set to false and manually select more physical destinations from the
high-powered machines
B. "Uneven Distribution" set to true and select all the physical destinations
C. "Uniform Distribute Destination" set to true and select all the physical destinations from the
high-powered and low- powered machines
D. "Load Balancing Policy" set to Random and select only the destination from the high-powered machine
Answer: A

BEA   0B0-108 examen   0B0-108   0B0-108 examen

Pour réussir le test BEA 0B0-108 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test BEA 0B0-108. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test BEA 0B0-108 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

0B0-108 dernières questions d'examen certification BEA et réponses publiés

Vous BEA 0B0-108 pouvez télécharger le démo BEA 0B0-108 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test BEA 0B0-108. Ajoutez la Q&A au panier.

Pass4Test est un seul site de provider le guide d'étude BEA 0B0-108 de qualité. Peut-être que vous voyiez aussi les Q&A BEA 0B0-108 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Si vous faites toujours la lutte contre le test BEA 0B0-108, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de BEA 0B0-108. Si vous avez déjà décidé à s'améliorer via BEA 0B0-108, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Pass4Test a de formations plus nouvelles pour le test BEA 0B0-108. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test BEA 0B0-108 à tous les candidats qui nous choisissent. L'importance de Certification BEA 0B0-108 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.

Code d'Examen: 0B0-108
Nom d'Examen: BEA (System Administration Exam)
Questions et réponses: 70 Q&As

Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test BEA 0B0-108.

0B0-108 Démo gratuit à télécharger: http://www.pass4test.fr/0B0-108.html

NO.1 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
Before deploying it into the test environment, you review the configuration of the Sales department's
Enterprise Application, which is meant to contain a JDBC Application Module ?you are concerned that it
may not have been built correctly. Most of an application's deployment descriptors only reference the
JDBC module using a JNDI name. Which file listed below is the only one that refers directly to the JDBC
Application Module file?
A. config.xml
B. application.xml
C. weblogic-ejb-jar.xml
D. weblogic-application.xml
Answer: D

BEA   certification 0B0-108   0B0-108

NO.2 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
When starting WebLogic Server, the Marketing database is unavailable. Which of these Data Source
configuration options will ensure that the Marketing application can access its database once it becomes
available again?
A. Test Connections On Reserve
B. Test Frequency
C. Connection Creation Retry Frequency
D. Login Delay
E. Profile Connection Reservation Wait
Answer: C

certification BEA   0B0-108   0B0-108   0B0-108   0B0-108 examen

NO.3 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
The database team informs you that they have now implemented Oracle Real Application Clusters (RA for
the Customer Service database, and applications should connect to a second database node if the
primary node is unavailable. You set up a Multi Data Source in Failover mode, which is configured to
use two Data Sources PrimaryDS and SecondaryDS, each connecting to one Oracle RAC node.
WebLogic Server will fail over to SecondaryDS if a connection test to PrimaryDS fails. Under what other
condition will this happen by default (that is, with no additional options checke)?
A. If a connection to PrimaryDS is not released within Statement Timeout seconds.
B. If all the connections to PrimaryDS are in use.
C. If the administrator has suspended the PrimaryDS Data Source.
D. Failover will only occur if a connection test fails for a PrimaryDS connection.
Answer: C

BEA   0B0-108 examen   0B0-108 examen   0B0-108   certification 0B0-108

NO.4 When configuring JMS Modules using the WebLogic Administration Console or WLST, the module
information will be stored in:
A. <modulename> stanza in the weblogic-application.xml file.
B. <modulename> stanza in the config\config.xml file.
C. <domain>/config/jms/<modulename>-jms.xml file
D. <domain>/servers/<servername>/targets/jms/<modulename>_<servername>.xml
Answer: C

BEA   0B0-108   0B0-108 examen   0B0-108   0B0-108

NO.5 What are the four basic components of a JMS system-resource module in the config.xml in WebLogic
9.x?
A. Name, target, subdeployment, descriptor-file-name
B. Domain, jms-server, connection factory, destination
C. Config.xml, jms-module, subdeployment, descriptor-file-name
D. Name, jms-module, subdeployment, descriptor-file-name
Answer: A

BEA   certification 0B0-108   0B0-108 examen   0B0-108   0B0-108

NO.6 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
In the future, each department will have its own schema within the Oracle database and the developers
are writing their code with this in mind. However, for now, it has been decided to store all data in a single,
company-wide schema. Which of the following approaches will make a future move to multiple schema
simple, while making the most efficient use of resources today?
A. Deploy an application-scoped Data Source module with each application.
B. Deploy a Data Source system module and assign it multiple JNDI names.
C. Deploy each department's application to its own WebLogic server.
D. Deploy a Data Source system module for each department's application.
Answer: B

certification BEA   0B0-108   certification 0B0-108   certification 0B0-108   certification 0B0-108   0B0-108

NO.7 WebLogic store-and-forward service is used for:
A. Storing and forwarding the configuration reliably to all the Managed Servers in a cluster
B. Storing log messages and forwarding them to the administration server for creating the Domain Log
C. Storing and delivering JMS messages reliably between applications across WebLogic Server 9.x
instances
D. Storing and forwarding EJB requests reliably to a back-end EJB cluster
Answer: C

BEA   certification 0B0-108   0B0-108   0B0-108   0B0-108

NO.8 The default location for storing JMS persistent messages in WebLogic Server 9.x is:
A. Database Store using JDBC
B. WebLogic Persistent Store using a file
C. LDAP server using the embedded LDAP server
D. Remote server using t3 socket buffering
Answer: B

BEA   certification 0B0-108   certification 0B0-108

NO.9 Scenario : The Stock Control Application you are going to deploy to a cluster of WebLogic Managed
Servers requires a JMS destination to asynchronously deliver the messages to the back-end
Warehousing Application. To distribute the messages across the cluster, you decided to configure the
distributed destination. Also the Warehousing Application is a legacy application written to implement a
proprietary MQ API connecting an MQ-Series server. The Stock Control Application is implemented as a
web application on a WebLogic cluster delivering the message to the distributed destination. The cluster
has three Managed Servers hosted on two high powered machines and one low range/powered machine.
To distribute the physical destinations unevenly across the clustered WebLogic Managed Servers so that
the high-powered machines can receive more messages than the low-powered machines, configure the
distributed destination with:
A. "Allocate Members Uniformly" set to false and manually select more physical destinations from the
high-powered machines
B. "Uneven Distribution" set to true and select all the physical destinations
C. "Uniform Distribute Destination" set to true and select all the physical destinations from the
high-powered and low- powered machines
D. "Load Balancing Policy" set to Random and select only the destination from the high-powered machine
Answer: A

certification BEA   0B0-108   0B0-108   0B0-108

NO.10 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
Before deploying it into the test environment, you review the configuration of the Sales department's
Enterprise Application, which is meant to contain a JDBC Application Module you are concerned that it
may not have been built correctly. Which of the following is not a requirement for JDBC modules?
A. It is contained in a file that ends in -jdbc.xml.
B. It includes an element that lists its targets.
C. It conforms to the weblogic-jdbc.xsd schema.
D. It includes a unique name element.
Answer: B

certification BEA   0B0-108 examen   certification 0B0-108   0B0-108

Les produits de Pass4Test sont préparés pour le test Certification BEA 0B0-108, y compris les formations et les informations ciblées au test BEA 0B0-108. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Pass4Test offre une formation sur BEA 0B0-107 matériaux examen

Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test BEA 0B0-107 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test BEA 0B0-107 est une bonne examination. Mais c'est difficile à passer le test BEA 0B0-107. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

Code d'Examen: 0B0-107
Nom d'Examen: BEA (BEA SOA Adoption and Implementation Exam)
Questions et réponses: 65 Q&As

0B0-107 Démo gratuit à télécharger: http://www.pass4test.fr/0B0-107.html

NO.1 G reat North T ravel is a multi-national travel agency implementing an S OA program. The program was
sponsored by the highest levels of both business and IT management, and is seen as a key tactic to their customer
satisfaction improvement and new product introduction strategies. A number of in-progress initiatives are using
various E AI technologies to perform integration, and there is no sharing of artifacts among these initiatives.
F urthermore, these initiatives all seem to be developing separate, and overlapping, customer data stores. Which
of the SOA domains could most use improving (choose two)?
A. Business Process & Strategy
B. Architecture
C. Costs & Benefits
D. Building Blocks
E. Projects & Applications
F. Organization & Governance
Answer: DF

BEA examen   certification 0B0-107   0B0-107

NO.2 J ohnston Marks, a regional bank, are looking to use S OA as a way to improve their product development
processes to support their growing business. Their primary problem is in dealing with the volume and diversity of
information required in developing a product. C urrently, usage feedback, marketing research information, and
industry intelligence is gathered through a variety of legacy systems, spreadsheets, desktop databases, letter mail,
and FAX. Which two goals are most appropriate for leveraging SOA in this process improvement exercise?
A. Reduce variance and ensure repeatability of the process
B. Eliminate some sources of information through services
C. Provide more consistent and managed interfaces to the various information sources
D. Enable the incorporation of newer and higher volume sources into the process
Answer: CD

BEA   0B0-107 examen   0B0-107 examen   0B0-107 examen   0B0-107   0B0-107

NO.3 Titan C ommunications is a provider of cable TV , wireless, and wireline phone services. Its stated business
objective is to transition from a product centric to a customer centric organization. What is the primary benefit
that an SOA would provide Titan?
A. Improved business/IT alignment.
B. Improved quality of customer service
C. Consistency in behavior across customer channels
D. Agility to change processes or introduce new products quickly
Answer: A

certification BEA   0B0-107 examen   0B0-107   0B0-107   0B0-107

NO.4 F elicity F inancial S ervices is a full service brokerage. Their primary business objective is to be the premier
provider of tailored services to leading edge investors in areas of fixed income securities, vanilla and exotic
derivatives, and whole loan investments. What is the primary benefit that an S OA would provide F elicity?
A. Improved business/IT alignment.
B. Improved quality of customer service
C. Consistency in information and behavior across channels
D. Agility to change processes or introduce new products quickly
Answer: D

BEA examen   0B0-107 examen   0B0-107

NO.5 Serendipity Securities, Inc. has two major business objectives:
1. E nsure consistent customer information and service capabilities across all product lines and all customer
channels (interactive voice response, call centre, and website)
2. Maintain business unit autonomy so new products and/or services can be introduced in a timely fashion.
What is the likelihood of achieving all the objectives through an SOA program?
A. Both objectives can be met; both agility and consistency are complementary.
B. It is unlikely the objectives can be met because agility and consistency are contradictory.
C . There is a tradeoff between agility and consistency in dealing with product information, and some compromise
must be made between the business units
D. There is a tradeoff between agility and consistency in dealing with customer information, and some
compromise must be made between the business units
Answer: D

BEA   certification 0B0-107   0B0-107   0B0-107   0B0-107

NO.6 Acme, Inc. is conducting an S OA transformation program. The program has been accepted by IT senior
management. The S OA steering committee has determined the appropriate priorities and complexities of
services, and how they should be harvested. The technical team has a good architectural understanding of the
design considerations and infrastructure needed to support the target services. Acme has not yet constructed or
harvested any services. What should Acme focus on next?
A. Focus on developing the initial shared services reference architecture
B. Services should be classified and categorized by their relative risk and business priority
C. A cost model should be constructed to evaluate best sequencing of services
D. Initial common services such as authentication, exception handling, and logging should be harvested and/or
constructed
Answer: D

certification BEA   0B0-107   0B0-107 examen

NO.7 Click the Exhibit button.
An automated business process requires human intervention only if an event occurs during its execution. What
is the term for this pattern? (S ee E xhibit for picture)
A. Fork/Join
B. Escalation
C. Delegation
D. Exception Handling
Answer: B

certification BEA   certification 0B0-107   0B0-107   0B0-107

NO.8 F lyHigh Airlines is planning their S OA program. An initial assessment of capability has been made, but no
other planning has begun to date. What should F lyHigh focus on next?
A. Focus on developing the initial shared services reference architecture
B. Services should be classified and categorized by their relative risk and business priority
C . A cost model should be constructed to evaluate best sequencing of services and assess the required
infrastructure investment
D. Common services such as authentication, exception handling, and logging should be constructed
Answer: A

BEA   certification 0B0-107   0B0-107   certification 0B0-107

NO.9 C hasm, Inc., a clothing retailer, is executing on their S OA program. They have created a reference
architecture, roadmap, constructed common services such as single-sign on, have identified project priorities.
S ome members of IT management are unaware of the S OA program, while other managers are unclear as to why
they are undertaking it. One of these managers is responsible for deploying a new system in support of new
promotions. Which of the SOA domains could most use improving (choose two)?
A. Business Process & Strategy
B. Architecture
C. Costs & Benefits
D. Building Blocks
E. Projects & Applications
F. Organization & Governance
Answer: CF

certification BEA   0B0-107   certification 0B0-107   0B0-107 examen   0B0-107

NO.10 Acme Builders, inc. has created an S OA roadmap, reference architecture and has exposed an initial handful of
data access and shared business services. The development team currently handles all requests for support,
diagnosis, and connectivity to these services through manual / ad hoc means. The number of consumers of
these services is growing. Which two service lifecycle phases are currently the most appropriate to their S OA
transformation program?
A. Monitor
B. Design
C. Expose
D. Build
E. Compose
F. Secure
Answer: AF

certification BEA   certification 0B0-107   certification 0B0-107   0B0-107 examen

Pass4Test peut offrir la facilité aux candidats qui préparent le test BEA 0B0-107. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A BEA 0B0-107 selon le résumé de test réel BEA 0B0-107. Vous pouvez réussir le test à la première fois sans aucune doute.

Dernières BEA 0B0-107 de la pratique de l'examen questions et réponses téléchargement gratuit

Pass4Test est un bon site d'offrir la facilité aux candidats de test BEA 0B0-107. Selon les anciens test, l'outil de formation BEA 0B0-107 est bien proche de test réel.

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification BEA 0B0-107. Les documentations particulièrement visée au test BEA 0B0-107 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test BEA 0B0-107.

Pass4Test est un site à offrir particulièrement la Q&A BEA 0B0-107, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification BEA 0B0-107, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test BEA 0B0-107 et même se renforcer vos connaissances professionnelles IT.

Code d'Examen: 0B0-107
Nom d'Examen: BEA (BEA SOA Adoption and Implementation Exam)
Questions et réponses: 65 Q&As

La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test BEA 0B0-107.

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification BEA 0B0-107. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test BEA 0B0-107 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification BEA 0B0-107.

0B0-107 Démo gratuit à télécharger: http://www.pass4test.fr/0B0-107.html

NO.1 J ohnston Marks, a regional bank, are looking to use S OA as a way to improve their product development
processes to support their growing business. Their primary problem is in dealing with the volume and diversity of
information required in developing a product. C urrently, usage feedback, marketing research information, and
industry intelligence is gathered through a variety of legacy systems, spreadsheets, desktop databases, letter mail,
and FAX. Which two goals are most appropriate for leveraging SOA in this process improvement exercise?
A. Reduce variance and ensure repeatability of the process
B. Eliminate some sources of information through services
C. Provide more consistent and managed interfaces to the various information sources
D. Enable the incorporation of newer and higher volume sources into the process
Answer: CD

certification BEA   0B0-107 examen   certification 0B0-107

NO.2 Acme, Inc. is conducting an S OA transformation program. The program has been accepted by IT senior
management. The S OA steering committee has determined the appropriate priorities and complexities of
services, and how they should be harvested. The technical team has a good architectural understanding of the
design considerations and infrastructure needed to support the target services. Acme has not yet constructed or
harvested any services. What should Acme focus on next?
A. Focus on developing the initial shared services reference architecture
B. Services should be classified and categorized by their relative risk and business priority
C. A cost model should be constructed to evaluate best sequencing of services
D. Initial common services such as authentication, exception handling, and logging should be harvested and/or
constructed
Answer: D

BEA examen   0B0-107 examen   certification 0B0-107

NO.3 Titan C ommunications is a provider of cable TV , wireless, and wireline phone services. Its stated business
objective is to transition from a product centric to a customer centric organization. What is the primary benefit
that an SOA would provide Titan?
A. Improved business/IT alignment.
B. Improved quality of customer service
C. Consistency in behavior across customer channels
D. Agility to change processes or introduce new products quickly
Answer: A

BEA   certification 0B0-107   0B0-107   0B0-107   0B0-107 examen

NO.4 F lyHigh Airlines is planning their S OA program. An initial assessment of capability has been made, but no
other planning has begun to date. What should F lyHigh focus on next?
A. Focus on developing the initial shared services reference architecture
B. Services should be classified and categorized by their relative risk and business priority
C . A cost model should be constructed to evaluate best sequencing of services and assess the required
infrastructure investment
D. Common services such as authentication, exception handling, and logging should be constructed
Answer: A

BEA   0B0-107   certification 0B0-107   0B0-107

NO.5 F elicity F inancial S ervices is a full service brokerage. Their primary business objective is to be the premier
provider of tailored services to leading edge investors in areas of fixed income securities, vanilla and exotic
derivatives, and whole loan investments. What is the primary benefit that an S OA would provide F elicity?
A. Improved business/IT alignment.
B. Improved quality of customer service
C. Consistency in information and behavior across channels
D. Agility to change processes or introduce new products quickly
Answer: D

BEA   0B0-107   0B0-107   0B0-107 examen

NO.6 Serendipity Securities, Inc. has two major business objectives:
1. E nsure consistent customer information and service capabilities across all product lines and all customer
channels (interactive voice response, call centre, and website)
2. Maintain business unit autonomy so new products and/or services can be introduced in a timely fashion.
What is the likelihood of achieving all the objectives through an SOA program?
A. Both objectives can be met; both agility and consistency are complementary.
B. It is unlikely the objectives can be met because agility and consistency are contradictory.
C . There is a tradeoff between agility and consistency in dealing with product information, and some compromise
must be made between the business units
D. There is a tradeoff between agility and consistency in dealing with customer information, and some
compromise must be made between the business units
Answer: D

BEA   0B0-107   0B0-107   0B0-107 examen   certification 0B0-107

NO.7 G reat North T ravel is a multi-national travel agency implementing an S OA program. The program was
sponsored by the highest levels of both business and IT management, and is seen as a key tactic to their customer
satisfaction improvement and new product introduction strategies. A number of in-progress initiatives are using
various E AI technologies to perform integration, and there is no sharing of artifacts among these initiatives.
F urthermore, these initiatives all seem to be developing separate, and overlapping, customer data stores. Which
of the SOA domains could most use improving (choose two)?
A. Business Process & Strategy
B. Architecture
C. Costs & Benefits
D. Building Blocks
E. Projects & Applications
F. Organization & Governance
Answer: DF

BEA examen   certification 0B0-107   0B0-107   0B0-107   certification 0B0-107   0B0-107 examen

NO.8 C hasm, Inc., a clothing retailer, is executing on their S OA program. They have created a reference
architecture, roadmap, constructed common services such as single-sign on, have identified project priorities.
S ome members of IT management are unaware of the S OA program, while other managers are unclear as to why
they are undertaking it. One of these managers is responsible for deploying a new system in support of new
promotions. Which of the SOA domains could most use improving (choose two)?
A. Business Process & Strategy
B. Architecture
C. Costs & Benefits
D. Building Blocks
E. Projects & Applications
F. Organization & Governance
Answer: CF

BEA   0B0-107   0B0-107 examen   0B0-107   0B0-107

NO.9 Click the Exhibit button.
An automated business process requires human intervention only if an event occurs during its execution. What
is the term for this pattern? (S ee E xhibit for picture)
A. Fork/Join
B. Escalation
C. Delegation
D. Exception Handling
Answer: B

certification BEA   0B0-107   certification 0B0-107   0B0-107

NO.10 Acme Builders, inc. has created an S OA roadmap, reference architecture and has exposed an initial handful of
data access and shared business services. The development team currently handles all requests for support,
diagnosis, and connectivity to these services through manual / ad hoc means. The number of consumers of
these services is growing. Which two service lifecycle phases are currently the most appropriate to their S OA
transformation program?
A. Monitor
B. Design
C. Expose
D. Build
E. Compose
F. Secure
Answer: AF

BEA examen   0B0-107 examen   0B0-107   certification 0B0-107

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A BEA 0B0-107 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat BEA 0B0-107 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test BEA 0B0-107.

0B0-106 dernières questions d'examen certification BEA et réponses publiés

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification BEA 0B0-106. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test BEA 0B0-106. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

C'est pas facile à passer le test Certification BEA 0B0-106, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test BEA 0B0-106 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test BEA 0B0-106, vous allez passer le test BEA 0B0-106 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test BEA 0B0-106. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Code d'Examen: 0B0-106
Nom d'Examen: BEA (BEA SOA Foundations Exam)
Questions et réponses: 252 Q&As

Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test BEA 0B0-106.

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test BEA 0B0-106 et passer le test à la première fois.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test BEA 0B0-106 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A BEA 0B0-106. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test BEA 0B0-106 sans aucune doute.

0B0-106 Démo gratuit à télécharger: http://www.pass4test.fr/0B0-106.html

NO.1 The aims of an SOA Program include: (Choose all that apply.)
A. The establishment of governance to standardize the way that functionality is delivered and deployed
for use by the entire enterprise.
B. The delivery of enterprise architecture that facilitates the sharing of functionality as services in a way
that is measurable and manageable and
meets operational goals.
C. The establishment of governance to standardize the way that enterprise information systems are
coded.
D. Providing accountability to the business for the translation of business requirements into information
technology.
E. The synthesis of business strategy and goals and the delivery cycles of projects into a roadmap for the
creation and deployment of shared
services.
F. The development of any service that is to be delivered to the enterprise.
Answer: ABDE

certification BEA   certification 0B0-106   certification 0B0-106   0B0-106

NO.2 When is SOA NOT an appropriate strategy? (Choose all that apply.)
A. When the applications in a given enterprise are necessarily stand-alone, and thus would not benefit
from a shared services approach.
B. When the political boundaries among lines of business and their related IT functions are
insurmountable, making sharing of functionality as
services impossible.
C. When the information systems in a given enterprise are homogeneous from a technological
perspective and thus the sharing of functionality
among them is essentially built into their construction.
D. When enterprise business processes are widely distributed across the information systems for
separate lines of business and are embedded
in the integration among those systems.
E. When application lifecycles are very short, and thus the effort to share functionality among them cannot
be offset by gains from reuse.
F. When a given enterprise has dozens or hundreds of information systems for which the exposing of
functionality from those systems as
services would be an extremely complex operation.
Answer: ACE

BEA   0B0-106   certification 0B0-106   0B0-106

NO.3 Which of the following provides the best definition of SOA?
A. SOA is a software engineering paradigm that prescribes the creation of loosely coupled interfaces
between the consumers of functionality and
the applications that represent that functionality.
B. SOA is a collection of technologies like enterprise service bus and Web Service management that
facilitate the delivery of enterprise
functionality as a set of services.
C. SOA is an IT strategy that organizes the discrete functions contained in enterprise applications into
interoperable, standards-based services
that can be combined and reused quickly to meet business needs.
D. SOA is a collection of standards, best practices, architectural models, and software development
methodologies, principally based on Web
Services, which may be incorporated into enterprise software engineering to provide information
technology to an enterprise in a
standards-based way.
Answer: C

BEA   0B0-106 examen   0B0-106 examen   0B0-106   0B0-106 examen

NO.4 What is the purpose of a Reference Architecture?
A. To provide a frame of reference for discussion of enterprise architecture concerns.
B. To provide linkage between the architecture of a given enterprise and certain of the enterprise
architecture frameworks, such as TOGAF or
Zachmann.
C. To define the reference material from which answers to questions about enterprise architecture may be
drawn.
D. To provide a comprehensive enterprise architecture that constitutes the correct, best practices-based
approach to constructing a modern
enterprise.
Answer: A

BEA examen   0B0-106 examen   certification 0B0-106

NO.5 How is SOA different from previous approaches involving the sharing of information assets? (Choose
all that apply.)
A. SOA is an enterprise architecture approach that does not specify a given technology or vendor
solution.
B. SOA embodies the concept of run-time, rather than development-time or code level reuse.
C. SOA provides detailed specifications meant to provide a maximum of assurance of interoperability
among supporting technologies and vendor
solutions.
D. The basis of SOA in XML and other standards provides true platform agnosticism.
Answer: ABD

BEA examen   0B0-106   certification 0B0-106   0B0-106 examen

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.