2013年7月17日星期三

Dernières CWAP PW0-270 examen pratique questions et réponses

Pass4Test est un seul site web qui peut offrir toutes les documentations de test CWAP PW0-270. Ce ne sera pas un problème à réussir le test CWAP PW0-270 si vous préparez le test avec notre guide d'étude.


Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test CWAP PW0-270 à se preuver. Mais le taux du succès et bien bas. Participer le test CWAP PW0-270 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.


Selon les anciens test CWAP PW0-270, la Q&A offerte par Pass4Test est bien liée avec le test réel.


Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification CWAP PW0-270. Il n'y a pas de soucis à réussir le test avec une haute note.


Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.


Code d'Examen: PW0-270

Nom d'Examen: CWAP (Certified Wireless Analysis Professional)

Questions et réponses: 60 Q&As

PW0-270 Démo gratuit à télécharger: http://www.pass4test.fr/PW0-270.html


NO.1 What HT PPDU format is shown in the exhibit?
A. HT-mixed format
B. HT-greenfield format
C. Non-HT format
D. Non-HT duplicate format
E. Dual Training Field format
F. ERP-OFDM format
Answer: A

certification CWAP   certification PW0-270   PW0-270   certification PW0-270

NO.2 In which 802.11 frames is the SSID present, provided the SSID is not removed through proprietary
software configuration by an administrator? (Choose 3)
A. Association Request
B. Reassociation Request
C. Probe Response
D. Disassociation
E. Authentication
F. Association Response
Answer: A,B,C

certification CWAP   PW0-270 examen   PW0-270   certification PW0-270

NO.3 Which statements are true regarding Beacons from an AP in an HT infrastructure BSS that is configured
with multiple WLAN profiles? (Choose 3)
A. Beacons can be disabled for security purposes.
B. The BSSID and Source Address are always the same.
C. The Destination Address is always FF:FF:FF:FF:FF:FF.
D. The Receiver address and the BSSID are always the same.
E. When the SSID is "hidden," the ESS subfield of the Capability Information field distinguishes one BSS
from another.
F. All Beacons generated by APs contain a TIM information element.
G. The Beacon interval must be the same for all WLANs (SSIDs) supported by a single AP
Answer: B,C,F

CWAP   certification PW0-270   PW0-270   PW0-270   certification PW0-270

NO.4 What IEEE 802.11 technology is illustrated by the exhibit?
A. Fragmentation
B. TCP Fragment Bursting
C. A-MSDU
D. A-MPDU E. U-APSD
F. Jumbo frames
Answer: C

certification CWAP   certification PW0-270   PW0-270   PW0-270

NO.5 Using the exhibit as a reference, answer the following.
STA1 sent a data frame to Mesh AP2 destined for a local file server on the same subnet with MAC
address 00:11:22:33:44:55. Mesh AP2's mesh forwarding algorithm determined that the frame should be
forwarded through Mesh AP1.
In the frame sent from Mesh AP2 to Mesh AP1, what is true of the contents of the MAC header? (Choose
3)
A. SA = Mesh AP2's MAC Address
B. RA = Mesh AP1's MAC Address
C. TA = STA1's MAC Address
D. DA = 00:11:22:33:44:55
E. To DS = 0
F. From DS = 1
Answer: B,D,F

certification CWAP   PW0-270   PW0-270   PW0-270 examen   certification PW0-270

NO.6 Which statement is true regarding the Association Identifier (AID) used in IEEE 802.11 WLANs?
A. The AID has a maximum value of 2048, and is used to uniquely identify a wireless client station
associated with an access point.
B. The AID has a maximum value of 2007, and resides in the duration/ID field of a PS-Poll frame.
C. The client station is assigned an AID value in the 802.11 authentication response frame.
D. The AID field is present only in Beacons frames.
E. The AID is used by the access point in EDCA mode to reduce duplicate transmissions when sending
multicasts.
Answer: B

CWAP   PW0-270 examen   certification PW0-270   certification PW0-270

NO.7 What is the purpose of a PHY preamble.?
A. It provides the receiver(s) with an opportunity for RF channel synchronization prior to the start of the
PLCP header.
B. It communicates important information about the PSDU's length, rate, and upper layer protocol-related
parameters.
C. It provides a cyclic redundancy check (CRC) for the receiving station to validate that the PLCP header
was received correctly.
D. It indicates to the PHY the modulation that shall be used for transmission (and reception) of the PSDU.
Answer: A

CWAP examen   PW0-270   certification PW0-270

NO.8 When a 5 GHz HT station in a 40 MHz BSS desires to protect a 40 MHz transmission from an OFDM
station using an RTS/CTS or CTS-to-Self exchange, what frame format is used for the RTS and/or CTS
frames?
A. HT-mixed format
B. HT-greenfield format
C. Dual-CTS
D. Non-HT Duplicate
E. Phased Coexistence PPDU
Answer: D

CWAP   PW0-270   PW0-270 examen   PW0-270   PW0-270

NO.9 According to 802.11-2007, in what frame type(s) might you find the PMK Count and PMKID List fields?
A. All frames that include the RSN IE
B. Only (Re)Association Request frames
C. Beacon and Probe Response frames
D. EAPoL 4-Way Handshake frames
E. Authentication and Association Request and Response frames
Answer: B

CWAP examen   PW0-270   PW0-270 examen   certification PW0-270

NO.10 In the frame decode shown, there are two sets of supported data rates. 1, 2, 5.5, and 11 Mbps are all
shown as "basic" data rates, and 6, 9, 12, 18, 24, 36, 48, and 54 Mbps are shown simply as supported
data rates.
What is true of "basic" data rates in this context?
A. The AP requires all client stations to support Basic rates in order to associate to its BSS.
B. The highest data rate set to Basic is automatically used to send broadcast traffic such as Beacon
frames.
C. Basic rates are optional data rates for the BSS, often used for assuring connectivity for legacy stations.
D. Basic rates are only used for multicast traffic, and do not affect unicast traffic.
E. Basic rates are defined in an AP's service set to specify mandatory data rates for all retry frames.
Answer: A

CWAP examen   PW0-270   PW0-270   PW0-270 examen

Est-ce que vous vous souciez encore pour passer le test CWAP PW0-270? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test CWAP PW0-270, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test CWAP PW0-270. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.


没有评论:

发表评论